Underfloor Heating Panel Pack/Kit 20m² P1100T

£398.00 ( ex VAT £398.00 )

The Water UFH Panel / Tray System – Wet Underfloor Heating Kit is designed for use with Screed floors which allows accurate fixing of the underfloor heating pipes.
All our Warm Water Underfloor Heating Packs / Kits are supplied with an Easi-Lay Underfloor Heating Water Pipe, it is a top quality European Manufactured Warm Water Underfloor Heating Pipe and well known for its’ flexibility, and it is what it says –
“Easy to Lay” means making installation much easier and faster to install.

The Easi-Lay underfloor heating water pipe make the laying of the warm water underfloor heating system quicker and easier to install.

The UFH Panel / Floor Trays is manufactured from waste stream polymers and utilisation of recycled polymers contributes to the achievement of BREEAM rating by the reduction
of carbon emissions.

If you have an underfloor heating project where you aren’t certain about any points and you like to discuss these various points or you unsure of your system needs? just give us a call Underfloor Parts on 01600 710909.

SKU: P1100T Categories: , , ,

Pack Contents

The below is the standard components; these components will vary accordingly on manifold size selection. Coupling and bend supports will suit the selection above.

1 x 100 m x 16 mm Easy-Lay Underfloor Heating Water Pipe
1 x 25 m UFH Screed Edge Insulation Strip with PVC apron
20 x UFH Castellated Trays 1220mm x 820mm x 30mm
2 x Pipe Bend Support
2 x UFH 16mm Manifold Pipe Coupling Nuts (Compression).
2 x 1/2″ Male BSP Reducing Fittings
1 x Reliance “A” Rated Single Room/Zone Pump Pack
1 x Underfloor Heating CAD Illustrated drawings
1 x Set of Instructions

Related products

  • Low Build Underfloor Heating Pack with Renovate Levelling Screed 20m

    Quick View £1,332.65 
    15 mm high Underfloor Heating Tray Pack This pack will cover an area of 20m² with a total screed height of 18 mm ready for under lay and carpet, should you wish ti tile the height can be reduced to just 15 mm high with the screed finishing level with the top of the panel, this is achievable due to the holes in the top of the castellated panels allowing the screed to flow inside the castellated section. The quick drying Renovate Self Levelling screed can be walked on in 2-2.5 hrs under normal drying conditions of room temperature of 20° c and good ventilation. After the screed has hardened the excess height on the perimeter edging strip can be trimmed off. Maximum floor strength will be achieved in 10-12 day at 18 mm thickness. Self Levelling Screed Data Sheet Please check your room perimeter edges to determine that there is sufficient Perimeter Edge if not you will be able purchase it separately.

  • Underfloor Heating Overlay System – 10m2 Kit Fermacell 18mm with Pump and Controls

    Quick View £492.00 

    10m2 Komfort Low Profile Underfloor Heating System

    Made in EuropeKomfort 18mm Low Profile Underfloor Heating System The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts /m² can be achieved (this will depend on floor finishes etc..) The UFH panels can be used on ground and upper floors. The Komfort UFH Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system. Approvals - European Technical Approval ETA-03/0050                       eco-INSTITUT Tested Product:                       Certificate no ID 0907 – 13701 – 001                       Certificate no ID 0907 – 13701 – 002                       Certificate no ID 0907 – 13701 – 003 Copies of these certificate are available upon request. While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market. 10 year complete system guarantee (excluding any electrical components). This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility. Any Deliveries to Islands and Scottish Highlands price on application

    If you are uncertain of your requirements or your require a specific area, please telephone 01600 710909 for assistance.

  • Underfloor Heating Kit – 40m² Floor Tray Pack P2200T

    Quick View from £625.00 
    The UFH Tray System - Wet Underfloor Heating Kit is designed for use with Screed floors which allows accurate fixing of the underfloor heating pipes. All our Warm Water Underfloor Heating Packs / Kits are supplied with an Easi-Lay Underfloor Heating Water Pipe, it is a top quality European Manufactured Warm Water Underfloor Heating Pipe and well known for its’ flexibility, and it is what it says - "Easy to Lay" means making installation much easier and faster to install. The Easi-Lay underfloor heating water pipe make the laying of the warm water underfloor heating system quicker and easier to install. The UFH Floor Trays are manufactured from waste stream polymers and utilisation of recycled polymers contributes to the achievement of BREEAM rating by the reduction of carbon emissions.

  • Underfloor Heating Floor Tray Kit – UFH 50m² UFH Pack P3250T

    Quick View from £735.00 
    The 50 m² UFH Tray System – Wet Underfloor Heating Kit is designed for use with Screed floors where the grid template allow accurate fixing of the underfloor heating pipes. All our Warm Water Underfloor Heating Packs / Kits are supplied with an Easi-Lay Underfloor Heating Water Pipe, it is a top quality European Manufactured Warm Water Underfloor Heating Pipe and well known for its’ flexibility, and it is what it says - “Easy to Lay” means making installation much easier and faster to install. The Easi-Lay underfloor heating water pipe make the laying of the warm water underfloor heating system quicker and easier to install. The UFH Floor Trays are manufactured from waste stream polymers and utilisation of recycled polymers contributes to the achievement of BREEAM rating by the reduction of carbon emissions.
MENU