Underfloor Heating Clip Rail Fixing / Track System 20m² P1100R

£359.94 inc VAT (£299.95 ex VAT)

The 20 m² UFH Clip Rail Fixing System – Wet Underfloor Heating Clip Track Packs / Kits are supplied with an Easi-Lay Underfloor Heating Water Pipe is a top quality European Manufactured Warm Water Underfloor Heating Pipe and well known for it’s flexibility,and it is what it says “Easy to Lay” means making installation much easier and faster to install.

This warm water underfloor heating pack is ideal for an extension, single room or a conservatory.

The warm water underfloor heating pipes can be installed with the following centres: 20m² @ 200mm centres.

The Easi-Lay underfloor heating water pipe making the installation of the warm water underfloor heating system quicker and easier.

If you have an underfloor heating project where you aren’t certain about any points and you like to discuss these various points or you unsure of your system needs? just give us a call Underfloor Parts on 01600 710909.

Pack Contents

The below is the standard components; these components will vary accordingly on manifold size selection. Coupling and bend supports will suit the selection above.

1 x 100 m x 16 mm Easy-Lay Underfloor Heating Water Pipe
1 x 25 m UFH Screed Edge Insulation Strip with PVC apron
30 x Hooked Clip Rail
100 x Manual 60mm Holding Pins/Clips
2 x Pipe Bend Support
2 x UFH 16mm Manifold Pipe Coupling Nuts (Compression).
2 x 1/2″ Male BSP Reducing Fittings
1 x Reliance “A” Rated Single Room/Zone Pump Pack
1 x Underfloor Heating CAD Illustrated drawings
1 x Set of Instructions