16mm PexAl Straight Solenoid Valve 230 v – Komfort
From £44.10 inc VAT
Komfort 16mm PexAl Pipe Straight Solenoid Valve for simply opening and closing a flow of liquid.
The Komfort Actuator Head is a 2 wire 230 volts.
This valve and actuator is controlled normally with a thermostat and can be used for central heating and underfloor heating single circuit control.
Underfloor Heating Thermostatic Head 20-60 deg Emmeti, Ivar and Uponor ReplacementQuick View £29.95 £35.94 Inc VATReplacement Sensor Head and Capillary Temperature range of 20 – 60° Celsius to enable the system to run at a floor surface temperature below 30° C M30 x 1.5 thread Uponor v3/v4/v5 Code 1002375 compatible replacement
Underfloor Heating Injection Valve – Return Limiting ValveQuick View from £41.55 £49.86 Inc VATThe Underfloor Heating Injection Valve is a self regulation valve. The Injection Valve does not require any electricity. The Injection Valve utilises the return limit sensor which controls the water temperature. The Injection Valve has a temperature range of 20 – 60° Celsius to enable the system to run at a floor surface temperature below 30° C. This is ideal for small areas of under floor heating or a small extension (up to 15m²) etc. where it can be used to extend to an existing radiator system which could run between 60-80° Celsius. The Injection Valve is fully adjustable; if the room is to cold it can easily be turned up and likewise if it is too hot it can just as easily be turned down. Please select your pipe connection size below, if you don't see the size you require please call us -
Pex = Cross linked Polyethylene Pert = Polyethylene Raised Temperature PB = Polybutylene
16mm PexAl Straight Valve Mohlenhoff 4 wire ActuatorQuick View £41.95 £50.34 Inc VAT16mm Pexal Pipe Straight Valve with 4 wire 230 v Mohlenhoff Solenoid A2024 Actuator Head with enabling boiler switching etc. Suitable for Central Heating as well as Underfloor Heating single loop control. Actuator Head is made in Germany by Mohlenhoff All components are Made in Europe Specification
- 4 Wires – Brown,Blue, Black & Grey
- Operation Voltage 230 V.AC 50/60Hz
- Operating Power 1.8 Watts
- Max. Inrush Current, max 300mA for max 200m/s
- Stroke 4mm
- Switching Current 230V.AC 5A (1A)
- Protection Class 11
- Type of Protection P54
- Ambient Temp. 0-60°C
- Storage Temp. 25-65°C
3/4″F x M Straight/Angled High Flow Valve with Thermostatic ControlQuick View £59.95 £71.94 Inc VAT3/4" BSP Angle/Straight Thermostatic Valve for high flow capacity. Thermostatically controllable valves are used to cut off and adjust flow through heating bodies. They can be equipped with thermostatic or manual head, or with motorised actuators such as Electro-thermal head. The thermostatic insert can be inspected and, if necessary, the spindle o-ring can be replaced even while the system is working. These valves can be mounted either as a straight or an angle valve according to requirements, simply by screwing the plug (also supplied) into the unused inlet. Max operating temperature 120 ° C Max operating pressure 10 bar. Thermostatic Head: Temperature range of 20 – 60° Celsius to enable the system to run at a floor surface temperature below 30° C M30 thread