15mm Straight Solenoid Valve
From £43.62 ( ex VAT £36.35 )
15mm Copper Pipe Straight Solenoid Valve for simply opening and closing a flow of liquid. The Actuator Head is a 2 wire 230 volts. This valve and actuator is controlled normally with a thermostat and can be used for central heating and underfloor heating single circuit control.
Plastic Pipes fitments are also available upon request.
16mm PexAl Straight Valve Mohlenhoff 4 wire ActuatorQuick View £41.9516mm Pexal Pipe Straight Valve with 4 wire 230 v Mohlenhoff Solenoid A2024 Actuator Head with enabling boiler switching etc. Suitable for Central Heating as well as Underfloor Heating single loop control. Actuator Head is made in Germany by Mohlenhoff All components are Made in Europe Specification
- 4 Wires – Brown,Blue, Black & Grey
- Operation Voltage 230 V.AC 50/60Hz
- Operating Power 1.8 Watts
- Max. Inrush Current, max 300mA for max 200m/s
- Stroke 4mm
- Switching Current 230V.AC 5A (1A)
- Protection Class 11
- Type of Protection P54
- Ambient Temp. 0-60°C
- Storage Temp. 25-65°C
Underfloor Heating Injection Valve – Return Limiting ValveQuick View from £41.55The Underfloor Heating Injection Valve is a self regulation valve. The Injection Valve does not require any electricity. The Injection Valve utilises the return limit sensor which controls the water temperature. The Injection Valve has a temperature range of 20 – 60° Celsius to enable the system to run at a floor surface temperature below 30° C. This is ideal for small areas of under floor heating or a small extension (up to 15m²) etc. where it can be used to extend to an existing radiator system which could run between 60-80° Celsius. The Injection Valve is fully adjustable; if the room is to cold it can easily be turned up and likewise if it is too hot it can just as easily be turned down. Please select your pipe connection size below, if you don't see the size you require please call us -
Pex = Cross linked Polyethylene Pert = Polyethylene Raised Temperature PB = Polybutylene
22mm x 2 port Motorised / Zone ValveQuick View £31.75Reliance (RWC) Two Port 22mm Zone Valve Features and Benefits
- Easy to use, clip-on detachable head
- Metal manual operating lever for strength and stability
- The motorised head can be retrofitted to other manufacturers’ valve bodies
This Polypipe Polyplumb PB9700ZV Mk 2 zone valve replaces the Polypipe Polyplumb PB9700ZV Mk1 (please note Polypipe Polyplumb PB9700ZV Motorised Valve MK1 with the detachable cable which is no longer available
Specifications Power supply 220-240V, 50/60Hz,Power Consumption 5 watts Auxiliary switch rating 4A 250V AC Water temp 5°C to 88°C Operating temperature 5 -50°C Response Opening Time approx. 16 secs. Response Closing Time approx. 7 secs. Max. differential pressure 0.69 bar Cable length 1m Max. static pressure 8 bar Max Close off Pressure 1 bar
Low Voltage Solenoid Valve 24 v 2 wire Actuator suits Various Pipe DiametersQuick View from £45.1224 volt Solenoid Valve Actuator with Valve and pipe couplings:- Select the pipe size required.