Hot and Cold Plumbing Manifolds

Showing 1–24 of 25 results

  • Emmeti 01306114 Topway Manifold Return Valve 24 x 19

    Quick View £10.39 
    Emmeti 01306114, Topway Thermostatic replacement kit 24 x 19 for 1" manifolds. 1/2" BSP Thread to connect into the manifold bar. This will fit both New and Old Versions of the Emmeti 1" Manifolds. 16/15mm Monoblocco Couplings Available on Request.
  • Plumbing Manifolds Hot/Cold Mains Water 2,3,4,5 Ports with Shut Off Valves – Universal

    Quick View £3.40 
    Universal Hot and Cold Water Modular Manifold.  Each plumbing manifold has a male and female 3/4" bsp end to allow more sections to be added in multiples of 2 to 5, with a universal hot/cold disk to label each manifold either hot or cold together with an outlet label. An individual manifold will serve to supply either the hot or cold water circuit throughout the house, in turn improving the water management of the domestic hot and cold water system. By using an domestic hot & cold manifold system, it greatly reduces the number of joints in your system, potential leak points and speeds up installation time. A manifold system also allows you to reduce certain pipe sizes per outlet, which will save on material and installation cost, (e.g. WC feed with 10mm and shower feed with 16mm). Click here for the Benefits & Technical    
  • 12mm Pert/Polybutylene Manifold Nut

    Quick View £2.35 
  • 15mm Pert/Polybutylene Manifold Nut

    Quick View £2.20 
  • 16mm Pert/Polybutylene Manifold Nut

    Quick View £1.99 
  • 16mm PertAl/PexAl Manifold Nut

    Quick View £1.97 
  • Donate to Leukaemia Myeloma Research Charity

    Quick View £ 
  • Donate FND Action Charity

    Quick View £ 
  • Donate to Anthony Nolan

    Quick View £ 
  • Aluminium Underfloor Heating Double Spreader Diffusion Plates

    40 x Aluminium Underfloor Heating Double Spreader Diffusion Plates

    Quick View £119.60 

    40 Aluminium UFH Double Spreader Plates

    This water underfloor heating spreader plate pack comprises of 40 Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These diffusion underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 20 aluminium plates will cover a floor area of 20 m² (Twenty Metre Square) 1000mm x 390mm double ufh spreader plate is often known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers / diffusing the heat efficiently to the underside of the floor board. The aluminium diffusion underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. SALE ITEMS CAN BE WITHDRAWN AT ANYTIME AND ARE SUBJECT TO AVAILABILITY.  
  • Underfloor Heating Triple Groove Spreader Plates

    40 x Underfloor Heating Triple Groove Spreader Plates

    Quick View £194.80 
     

    Spreader Plates Omega Channels (1000mm x 390mm x 150mm pipe centres)

    British Made Warm Water Aluminium Triple Underfloor Heating Spreader Plates Qty. 40 x (1000mm x 390mm) with 3 preformed omega shape grooves for installing the underfloor heating pipe at 150mm centres. The UFH triple spreader plate is suitable for use with 15 & 16mm underfloor heating pipe, with the underfloor heating pipe being held securely within the preformed grooves of the UFH triple spreader plate. The UFH triple spreader plate is designed to be used where the heat source is run at a lower temperature than that of a normal boiler system i.e. ideal with heat pump systems. Aluminium triple grooved spreader plates are also used in applications that have high heat loss areas as they can assist in providing a higher heat output from the underfloor heating system. Before the underfloor heating aluminium spreader plates are fitted, insulation is installed between the floor boards to prevent downward heat loss. The aluminium ufh spreader plates can then be fitted directly to the top of the floor joist, or battens, with joist centres of 400mm apart. The triple channel / groove ufh spreader plate is fitted so that it has direct contact with the underside of the floorboards. With the triple groove plates sitting tightly beneath the floorboards the underfloor heating system will offer maximum heat transfer; the radiant heat will spread evenly across the floor boards to heat the room. The heat output from the floor will depend on the flow temperature being delivered by the heat source and the temperature drop across the system circuit. Insulation panels or fibre wool insulation must be fitted directly beneath the spreader plate for the underfloor heating system to offer maximum efficiency and output. • UFH Triple Groove / Preformed Channels for 120mm Pipe Spacing • 1000mm x 390mm • British Made High Grade Aluminium • Suitable for 15 & 16mm Underfloor Heating Pipe • Supplied in Box Quantities of 40 Plates = Floor Area of 20 m² • Easy to Install • Fast Warm-Up • Fixed to Wood Joists at 400 Centres • Ideal for Use with Ground/Air Source Heat Pump SALE ITEMS CAN BE WITHDRAWN AT ANYTIME AND ARE SUBJECT TO AVAILABILITY.  
  • 16mm x 300m Underfloor Heating Pipe Komfort PERT-AL Multilayer Pipe

    16mm x 300m Underfloor Heating Pipe Komfort PERT-AL Multilayer Pipe

    Quick View £207.00 
    Made in Europe300m x 16mm Komfort Multilayer Pert-Al-Pert Pipe with Internal Aluminium Oxygen Barrier The welding joint method used for welding the aluminium oxygen barrier is a overlap joint which offer a weld width area of 4 mm or wider, unlike the but welded joint which is between 0.2 to 0.3mm with such narrow weld area this method it has weaker joint. They are composed of an inner and outer layer of PERT, that are bonded  by a special glue to the intermediate layer of aluminium. By that way, a perfect oxygen barrier is accomplished, that ensures their perfect un-ruptured connection. They are characterised as pipes of the century,because they combine the advantages of metal pipes (small linear expansion and high mechanical strength) with the advantages of plastic pipes (flexibility, without formation of salts inside the pipe, resistance to electro corrosion, low noise level, fast and easy installation ) ADVANTAGES: 
    • Great flexibility
    • No salts are deposited on the inner surface
    • Without electrolysis
    • Small thermal expansion
    • Resistance to adverse conditions (high temperature, high pressure)
    • Wide range of dimensions
    • Easy connection to all conection systems of plastic pipe
    • Guaranteed quality and insurance for their good function
    • 100% oxygen barrier existence
    The Komfort tubes AL-PERT is produced according to international standards ASTM F-1282 and accompanied by a certified SKZ for their mechanical strength and warranty 2.000.000 CHF (swiss francs) and is Manufactured in the European Union. WRAS Approved German SKZ certificate strength of plastic pipes in pressure and temperature of water according to German regulations in DIN16836:2005-08 and DIN 16833 for the raw material. KTW (TZW) certificate of suitability of the raw material for drinking water according to DVGW W 270. NSF certificate of suitability of the raw material for drinking water according to NSF/ANSI 61. The Komfort multilayer pipe combines the properties of a metal and plastic pipe and despite it has the flexibility of a plastic pipe and is very light weight, in parallel has strong properties and provided higher dimensional stability under high water temperature and pressure, minimum thermal expansion and resistance to degradation.” The Komfort Al-Pert pipe is suitable for Underfloor Heating Systems, Radiator Heating and Domestic Plumbing applications.
  • 16mm x 200m Underfloor Heating Pipe Komfort PERT-AL Multilayed Pipe

    16mm x 200m Underfloor Heating Pipe Komfort PERT-AL Multilayed Pipe

    Quick View £138.00 
    Made in Europe200 m x 16mm Komfort Multilayer Pert-Al-Pert Pipe with Internal Aluminium Oxygen Barrier The welding joint method used for welding the aluminium oxygen barrier is a overlap joint which offer a weld width area of 4 mm or wider, unlike the but welded joint which is between 0.2 to 0.3mm with such narrow weld area this method it has weaker joint. They are composed of an inner and outer layer of PERT, that are bonded  by a special glue to the intermediate layer of aluminium. By that way, a perfect oxygen barrier is accomplished, that ensures their perfect unruptured connection. They are characterised as pipes of the century,because they combine the advantages of metal pipes (small linear expansion and high mechanical strength) with the advantages of plastic pipes (flexibility, without formation of salts inside the pipe, resistance to electro corrosion, low noise level, fast and easy installation ) ADVANTAGES: 
    • Great flexibility
    • No salts are deposited on the inner surface
    • Without electrolysis
    • Small thermal expansion
    • Resistance to adverse conditions (high temperature, high pressure)
    • Wide range of dimensions
    • Easy connection to all conection systems of plastic pipe
    • Guaranteed quality and insurance for their good function
    • 100% oxygen barrier existence
    The Komfort tubes AL-PERT is produced according to international standards ASTM F-1282 and accompanied by a certified SKZ for their mechanical strength and warranty 2.000.000 CHF (swiss francs) and is Manufactured in the European Union. WRAS Approved German SKZ certificate strength of plastic pipes in pressure and temperature of water according to German regulations in DIN16836:2005-08 and DIN 16833 for the raw material. KTW (TZW) certificate of suitability of the raw material for drinking water according to DVGW W 270. NSF certificate of suitability of the raw material for drinking water according to NSF/ANSI 61. The Komfort multilayer pipe combines the properties of a metal and plastic pipe and despite it has the flexibility of a plastic pipe and is very light weight, in parallel has strong properties and provided higher dimensional stability under high water temperature and pressure, minimum thermal expansion and resistance to degradation.” The Komfort Al-Pert pipe is suitable for Underfloor Heating Systems, Radiator Heating and Domestic Plumbing applications.
  • 16mm x 150m Komfort Underfloor Heating Multilayer ALPERT Pipe

    16mm x 150m Komfort Underfloor Heating Multilayer ALPERT Pipe

    Quick View £103.50 
    Made in Europe150 m x 16 mm Komfort Multilayer Pert-Al-Pert Pipe with 100% Internal Aluminium Oxygen Barrier The welding joint method used for welding the aluminium oxygen barrier is a overlap joint which offer a weld width area of 4 mm or wider, unlike the but welded joint which is between 0.2 to 0.3 mm with such narrow weld area this method it has weaker joint. They are composed of an inner and outer layer of PERT, that are bonded  by a special glue to the intermediate layer of aluminium. By that way, a perfect oxygen barrier is accomplished, that ensures their perfect un-ruptured connection. They are characterised as pipes of the century,because they combine the advantages of metal pipes (small linear expansion and high mechanical strength) with the advantages of plastic pipes (flexibility, without formation of salts inside the pipe, resistance to electro corrosion, low noise level, fast and easy installation ) ADVANTAGES: 
    • Great flexibility
    • No salts are deposited on the inner surface
    • Without electrolysis
    • Small thermal expansion
    • Resistance to adverse conditions (high temperature, high pressure)
    • Wide range of dimensions
    • Easy connection to all connection systems of plastic pipe
    • Guaranteed quality and insurance for their good function
    • 100% oxygen barrier existence
    The Komfort tubes AL-PERT is produced according to international standards ASTM F-1282 and accompanied by a certified SKZ for their mechanical strength and warranty 2.000.000 CHF (swiss francs) and is Manufactured in the European Union. WRAS Approved German SKZ certificate strength of plastic pipes in pressure and temperature of water according to German regulations in DIN16836:2005-08 and DIN 16833 for the raw material. KTW (TZW) certificate of suitability of the raw material for drinking water according to DVGW W 270. NSF certificate of suitability of the raw material for drinking water according to NSF/ANSI 61. The Komfort multilayer pipe combines the properties of a metal and plastic pipe and despite it has the flexibility of a plastic pipe and is very light weight, in parallel has strong properties and provided higher dimensional stability under high water temperature and pressure, minimum thermal expansion and resistance to degradation.” The Komfort Al-Pert pipe is suitable for Underfloor Heating Systems, Radiator Heating and Domestic Plumbing applications.
  • 16mm x 100m Komfort Underfloor Heating PERT-AL-PERT Multilayer Pipe

    16mm x 100m Komfort Underfloor Heating PERT-AL-PERT Multilayer Pipe

    Quick View £69.00 
    Made in Europe100 m x 16mm Komfort Multilayer Pert-Al-Pert Pipe with Internal Aluminium Oxygen Barrier The welding joint method used for welding the aluminium oxygen barrier is a overlap joint which offer a weld width area of 4 mm or wider, unlike the but welded joint which is between 0.2 to 0.3 mm with such narrow weld area this method it has weaker joint. They are composed of an inner and outer layer of PERT, that are bonded  by a special glue to the intermediate layer of aluminium. By that way, a perfect oxygen barrier is accomplished, that ensures their perfect un-ruptured connection. They are characterised as pipes of the century,because they combine the advantages of metal pipes (small linear expansion and high mechanical strength) with the advantages of plastic pipes (flexibility, without formation of salts inside the pipe, resistance to electro corrosion, low noise level, fast and easy installation ) ADVANTAGES: 
    • Great flexibility
    • No salts are deposited on the inner surface
    • Without electrolysis
    • Small thermal expansion
    • Resistance to adverse conditions (high temperature, high pressure)
    • Wide range of dimensions
    • Easy connection to all connection systems of plastic pipe
    • Guaranteed quality and insurance for their good function
    • 100% oxygen barrier existence
    The Komfort tubes AL-PERT is produced according to international standards ASTM F-1282 and accompanied by a certified SKZ for their mechanical strength and warranty 2.000.000 CHF (swiss francs) and is Manufactured in the European Union. WRAS Approved German SKZ certificate strength of plastic pipes in pressure and temperature of water according to German regulations in DIN16836:2005-08 and DIN 16833 for the raw material. KTW (TZW) certificate of suitability of the raw material for drinking water according to DVGW W 270. NSF certificate of suitability of the raw material for drinking water according to NSF/ANSI 61. The Komfort multilayer pipe combines the properties of a metal and plastic pipe and despite it has the flexibility of a plastic pipe and is very light weight, in parallel has strong properties and provided higher dimensional stability under high water temperature and pressure, minimum thermal expansion and resistance to degradation.” The Komfort Al-Pert pipe is suitable for Underfloor Heating Systems, Radiator Heating and Domestic Plumbing applications.
  • 40 x Aluminium Underfloor Double Spreader Plates

    Quick View £119.60 

    40 Aluminium Underfloor Spreader Plates

    This water underfloor heating spreader plate pack comprises of 40 Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These diffusion underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 20 aluminium plates will cover a floor area of 20 m² (Twenty Metre Square) 1000mm x 390mm double ufh spreader plate is often known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers / diffusing the heat efficiently to the underside of the floor board. The aluminium diffusion underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. SALE ITEMS CAN BE WITHDRAWN AT ANYTIME AND ARE SUBJECT TO AVAILABILITY.  
  • 20m-staple-pack

    Single Room Water Underfloor Heating Staple Kit P1100S for Screed Floors

    Quick View £299.95 
    Water UFH System complete with all UFH pipes and fixings, instructions This water UFH System contains sufficient materials to heat an area of 25m² if the property is up to current building regulations. We only use in our water UFH Systems top  quality European made pipe.
  • 20m-staple-pack

    Water UFH Systems UPC03

    Quick View £299.00 

    Wet Underfloor Heating System suitable for heating an floor surface area of -

    25m² with Pipe Centres at 250 mm apart

    or

    20m² with Pipe Centres at 200 mm apart

    This wet underfloor heating system includes the Pump Control unit, underfloor heating pipe and pipe fixing clips together with the perimeter edging strip.

    Thermostat and other controls can easily be added with this wet underfloor heating system to allow full independent control of your underfloor heating system.

  • 20m-staple-pack

    Wet Underfloor Heating

    Quick View £279.95 

    Water  Underfloor Heating Kits comprises Underfloor Pump Pack and pipes, pipe fixings and edging border.

    These Water  Underfloor Heating Kits are for screed floor systems where the underfloor heating pipe are embedded within the screed

    The underfloor heating kit contain sufficient materials to cover 25 sq.m on new build properties our  PE RT pipe is made in EU and easy to install.

    Top quality European pipes are in our water underfloor heating kits.

     

  • 20m-staple-pack

    Water Underfloor Heating Kits UPC02

    Quick View £299.00 

    20m Wet Underfloor Heating Kit with all Underfloor Heating Pipes, 200 x Underfloor Heating Pipe Clips, UFH control pack and Edging Perimeter Strip.1 set of fitting instructions and Cad drawings.

    The high quality 15mm underfloor heating pipe supplied is European manufactured pipe.

  • 20m-staple-pack

    Conservatory Water Underfloor Heating Pack

    Quick View £299.00 
    Conservatory Water Underfloor Heating Pack up to 20 sq. metres
  • UFH-Pack-Staple-kit-6p

    Conservatory Water Underfloor Heating Kit UPC01

    Quick View £349.00 

    This water underfloor heating system will cover a floor areas between 30 - 37.5 m²

    The  water underfloor heating system has the following parts included

    150 metres of underfloor heating pipe manufactured in Europe with the latest technology in pipe manufacturing.

    25 linear metres Border Edging Strip for floor screed expansion

    1 xUnderfloor Heating Manifold and Pipe couplings

    1 pair of manifold isolation Ball valves

    2 x Air Vents

    2 x Fill & Drain Valves with hose tail

    1 x Grundfos A rated Pump

    1 x Thermostatic Nickel Plated Water Temperature Control Pack

    1 large bag of pipe fixing clips

    1 Set Cad Drawings and instructions

    Underfloor Heating water pipes laid at 20 cm centres the system will heat older properties with moderate heat losses. Modern new build the Underfloor Heating water pipes can be laid at 25 cm centres, this is based on using a boiler as the heat source for the water under floor heating system.

  • Single Zone Underfloor Heating Pump Control Unit

    Single Zone Underfloor Heating Pump Control Unit

    Quick View £221.54 

    Single Zone Underfloor Heating Control Unit is the perfect way to provide heating to a single room, conservatory or house extension.

    The single zone underfloor heating control unit is pre-assembled and pre-wired to allow for a fast and simple installation.
    It can be simply plugged into any electrical socket or wired in to spur fuse switch. However it can be wired through a thermostat giving temperature control and connected into existing radiator circuit, when used this way the pump will be unable to operate independently, the underfloor system will only receive heat when the radiator system is operation.

    The best option is to have the single room underfloor heating control unit operating fully independently and being controlled by a programmable thermostat, this will offer you separate time and give you the benefit of both comfort and economy temperature levels to suit your personal requirements.
    Our sales team will be happy to advise you to how to connect the pipework etc.
    The single room underfloor heating control unit has integral ball valves to allow for isolation from the primary heating system, an adjustable blending valve to control the water temperature.
    The single zone underfloor heating control unit is fitted with a Grundfos pump is the latest energy efficient pump which is mounted on anti-vibration mounting bracket ensures silent operation.

  • Single Room Underfloor Heating Control Unit

    Single Room Underfloor Heating Control Unit

    Quick View £221.54 

    Single Room Underfloor Heating Control Unit (Very Similar to Speedfit) is the perfect way to provide heating to a single room, conservatory or house extension.This single room underfloor heating control unit is suitable for all floor types and will heat a floor area of 20m²

    The single room underfloor heating control unit is pre-assembled and pre-wired to allow for a fast and simple installation.
    It can be simply plugged into any electrical socket or wired in to spur fuse switch. However it can be wired through a room thermostat giving temperature control and connected into existing radiator circuit, when used this way the pump will NOT operate independently, the underfloor system will only receive heat when the radiator system is operation.

    The best option is to have the single room underfloor heating control unit operating fully independently and being controlled by a programmable thermostat, this will offer you separate time and give you the benefit of both comfort and economy temperature levels to suit your personal requirements.
    Our sales team will be happy to advise you to how to connect the pipework etc.
    The single room underfloor heating control unit has integral ball valves to allow for isolation from the primary heating system, an adjustable blending valve to control the water temperature.
    The single room underfloor heating control unit is fitted with a Grundfos pump is the latest energy efficient pump which is mounted on anti-vibration mounting bracket ensures silent operation.

    The single room underfloor heating control unit has a 2 year guarantee.

MENU