Showing all 12 results

• 

  Emmeti Control T Electrothermic Actuator Head 01213242 230v

  Quick View £9.95 

  Emmeti 230v Actuator  (part no 01213242)

  A range of electrothermic heads for use with Emmeti Topway Type 2 (T2) manifolds, FMU2 Floor Mixing Units and FCU Floor Control Units.

  The actuator  two-wire normally closed (Typically used with Underfloor Heating)

  An electrothermic head is, essentially a 2 port zone valve that opens and closes the port to the underfloor loop when energised by the room thermostat.

  The electrothermic head is fitted to the underfloor heating return manifold bar.

• 

  Heatmiser TA230 Actuator 230V 2 Wire M30 Thread

  Quick View £15.60 
  The Heatmiser TA230 is our 2 wire thermal actuator fitting directly on to underfloor manifold.

  • 230v Powered
  • 2 Wire Normally Closed
  • M30 Thread
• 

  Watts 230v 2 wire Underfloor Heating Electrothermic Actuator 26LC

  Quick View £12.95 
  Watts 230 volts 2 Wire Underfloor Heating Electro Thermic Actuator.

  • 1.8 watts Low Power Consumption
  • I.P 64 Rated which could be fitted within a Bathroom
  • Actuator can be installed 360°
  • Simple Plug in Cable with Safety Catch
  • Opening Time - Initial 75 seconds ~Final 3 minutes
  • Actuator Stroke - Max 3.5mm
  • Valve Stroke - 2.5 mm
  • Operating Temperature - 0° - 50° C
  • Maximum Fluid Temperature - 110° C
  • Flame Retardant Plastic Cover and Components
  • Cable Length 1 mtr x 0.5mm²
  • Ring Nut M30 x 1.5 Thread
• 

  Giacomini Hep2o Underfloor Thermal Actuator 230v 2 wire R473 N.C.

  Quick View £16.95 
  Giacomini / Hep2o Manifold Thermal Actuator R473 The actuators of the R473 series are normally closed (NC); they allow the hydraulic supply of the circuits in presence of voltage and they have a cable with two conductors for the connection to room thermostats or adjustment regulators. The R473M version has a stroke end micro-switch for driving circulators or zone valves. The R473V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R473MV version has either varistor or stroke end micro-switch. These models have a manual block mechanism in opening position to make the assembly on valves easier, and allow maintenance to the electric plant by maintaining the water circulation into the hydraulic system. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of  R473 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally closed “NC” (R473) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1m • Opening time at ambience temperature for R473/R473V/R473M/R473VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NO with close valve (R473M - R473MV) R478V 230v T50 2 wire Normally Closed 2.5 watts IP 40 Rated SUITABLE REPLACEMENT FOR R475 RANGE
• 

  Komfort Underfloor Heating Actuator 30mm Thread Universal Fitting

  Quick View £15.99 
  The Komfort Mk2 230v 2 wire Actuator for Energy-Saving Regulation of underfloor heating and cooling systems With M30 mm Metal Thread onto the underfloor heating manifold. Red Clip allows the actuator to be open without power allowing filling and flushing the system before the system has been wired. The red clip should be removed once the system is ready to operate normally. Compatible replacement for Rehau, Robbens, Myson, Emetti, Nuheat, Reliance and many more actuators. Click link for further details on this product KomfortActuator.pdf Made in Germany          
• 

  Underfloor Heating Komfort Actuator Mk3 230v 2wire

  Quick View £15.99 
  The New Generation Komfort Mk3 230v 2 wire Actuator for Energy-Saving Regulation of underfloor heating and cooling systems. With M30 mm Metal Thread onto the underfloor heating manifold. This new Actuator has a manual handle to allow the actuator to be opened and closed manually without having to touch any of the electrical components. This actuator also now comes with an all new blue indicator, so you can visually see when the actuator is in the open or close position. Compatible replacement for Rehau, Robbens, Myson, Emetti, Nuheat, Reliance and many more actuators. MADE IN GERMANY
• 

  Giacomini R478 Underfloor Heating Thermal Actuator – Normally Open 2 Wire 230 v

  Quick View £18.95 
  Giacomini Hep2o R478 Underfloor Heating Thermal Actuator 230v 2 wire R478V The actuators of the R478 series are normally open (NA). They allow them hydraulic supply of the circuits when there is no voltage and they have a cable with two conductor for the connection to room thermostats or adjustment regulators. The R478M version has a stroke end micro-switch for driving circulators or zone valves. The R478V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R478MV version has either varistor or stroke end micro-switch. In radiant panel heating and cooling systems, the normally open electrical actuators are to be preferred as they are not supplied for most of the time involving a sensible electric energy saving. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R478 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally Open “NO” (R478) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1,5 m • Opening time at ambience temperature for R478/R478V/R478M/R478VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NC with open valve (R478M - R478MV) Normally dispatched in 3-4 days
• 

  Polyplumb Replacement 2 Wire Underfloor Actuator 230v for UFCH Polyipe PB00401 and J G Speedfit

  Quick View £14.85 
  2 Wire - 230volts Underfloor Heating Manifold Actuator Compatible Replacement for Polypipe UFCH Polyplumb PB00401 This actuator was also used with Speedfit and will be a compatible replacement.
• 

  Myson Floortec 2 Wire Underfloor Actuator 230v Direct Replacement 50140

  Quick View £21.79 
  Myson Floortec Compatible Underfloor Heating Actuator 220-240V Actuator (Myson Part no. 50140) Adaptor ring (allowing the actuator to snap on) for connection on to the underfloor heating manifolds with M30 thread   Please note photos are for illustration purposes only, as the new style may be supplied.    
• 

  Speedfit JGUFHA(240V)/2 Replacement – UFH Thermoelectric Actuator – New Style

  Quick View £22.36 
  Adaptor ring for connection on on to the underfloor heating manifolds with M30 thread (this is the most popular underfloor heating manifold thread size). This Underfloor Heating Actuator Head is made in Germany by Mohlenhoff Specification 2 Core  / Wires – Brown & Blue Operation Voltage 230/240 V.AC 50/60Hz Operating Power 1.0 Watts Max. Inrush Current, max 300mA for max 200m/s Stroke 4mm Switching Current 230 V.AC 5A (1A) Protection Class 11 Type of Protection P54 Ambient Temp.  0-60°C Storage Temp.   25-65°C This actuator will replace the following actuators -

  • Speedfit (John Guest) Purmo Polypipe Eurotech Far Nuheat

     
• 

  Mohlenhoff Thermoelectric Actuator 230v 2 Wire New Style

  Quick View £22.36 
  Mohlenoff Thermoelectric UFH Actuator Head 230 volt 2 Wire (2 core). Adaptor ring for connection on on to the underfloor heating manifolds with M30 thread (this is the most popular underfloor heating manifold thread size). This Underfloor Heating Actuator Head is made in Germany by Mohlenhoff

  Actuator for underfloor heating 230 V including adapter  ring VA10,

  This actuator to fit on  John Guest Speedfit,Osma, Solflex, Beulco, Cronatherm, KaMo, Myson, Purmo, Emetti ,Watts, Nuheat, Rehau, Ivar, Robbens and many others manifolds

  Please note -  old and new actuator styles are displayed,  we will now only supply new actuator style.
• 

  Uponor Replacement Underfloor Heating Actuator M28 mm Thread 230v 2 wire

  Quick View £24.99 
  Uponor compatible replacement 230v 2 wire Actuator complying to Energy-Saving regulation of underfloor heating and cooling systems. To install screw on the M28 * 1.5 mm adapter ring on to the manifold, Simply clip on to adaptor ring.   Version NC = Normally closed when power is off Made in Germany