Uponor Replacement Underfloor Heating Actuator M28 mm Thread 230v 2 wire
From £24.99 ( ex VAT £24.99 )
Uponor compatible replacement 230v 2 wire Actuator complying to Energy-Saving regulation of underfloor heating and cooling systems.
To install screw on the M28 * 1.5 mm adapter ring on to the manifold, Simply clip on to adaptor ring.
Version NC = Normally closed when power is off
Made in Germany
Mohlenhoff Adaptor M28 x 1.5 – VA32 Green Actuator HeadQuick View £2.41Actuator Adaptor Ring VA32 This adaptor is Green fits M28 x 1.5 thread Manufacturer: Mohlenhoff
Giacomini Hep2o Underfloor Thermal Actuator 230v 2 wire R473 N.C.Quick View £16.95Giacomini / Hep2o Manifold Thermal Actuator R473 The actuators of the R473 series are normally closed (NC); they allow the hydraulic supply of the circuits in presence of voltage and they have a cable with two conductors for the connection to room thermostats or adjustment regulators. The R473M version has a stroke end micro-switch for driving circulators or zone valves. The R473V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R473MV version has either varistor or stroke end micro-switch. These models have a manual block mechanism in opening position to make the assembly on valves easier, and allow maintenance to the electric plant by maintaining the water circulation into the hydraulic system. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R473 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally closed “NC” (R473) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1m • Opening time at ambience temperature for R473/R473V/R473M/R473VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NO with close valve (R473M - R473MV) R478V 230v T50 2 wire Normally Closed 2.5 watts IP 40 Rated SUITABLE REPLACEMENT FOR R475 RANGE
Mohlenhoff VA80 M30 x 1.5 Actuator Adaptor RingQuick View £2.01Mohlenhoff M30 x 1.5 Adapotor ring. Adaptor Code VA80 Compatible with Most Underfloor Heating Manifolds.
- Onda, Schlösser(from 1993)
- Oventrop (M30 x 1.5)
- Roth (distributor)
- Dinotherm (distributor)
Watts 22CX Actuator Head 24V 2 Wire N/C 22CX24NC2Quick View £13.90Watts Underfloor Heating Actuator 24 volts can also be used with valves, fan coils, underfloor heating manifolds, etc Normally Closed - 24V IP54 - 22C Electro-thermic Actuator - 22CX24NC2
- Electro-thermic actuator compact design with on/off action.
- Cap made of flame retardant plastic
- Chrome-plated brass threaded ring nut M30 x 1.5
- Opening time: 3 Min (start) - 5 Min (end)
- Normally Closed (N.C.)
- Plug thrust: 80N
- Stroke: 3.5mm
- Power cable: 2 core
- Power consumption: 1.6W