Underfloor Heating Chrome Plated Single Room FHV Regulating Valve for Small Rooms
From £149.76 inc VAT
Underfloor Heating FHV Regulating Valve with Chrome Plated finish
This Floor Temperature Valve is unique it controls both the air temperature and the water temperature making it perfect for small single rooms of underfloor heating using only the primary heating pump without the need of an additional underfloor heating pump.
All sensors and underfloor heating pipe connections on to FHV Regulating Valve are included.
FHV Regulating Valve can be used as an extension to the radiator system for small areas, includes air and water temperature control.
Giacomini R478 Underfloor Heating Thermal Actuator – Normally Open 2 Wire 230 vQuick View £18.95 £22.74 Inc VATGiacomini Hep2o R478 Underfloor Heating Thermal Actuator 230v 2 wire R478V The actuators of the R478 series are normally open (NA). They allow them hydraulic supply of the circuits when there is no voltage and they have a cable with two conductor for the connection to room thermostats or adjustment regulators. The R478M version has a stroke end micro-switch for driving circulators or zone valves. The R478V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R478MV version has either varistor or stroke end micro-switch. In radiant panel heating and cooling systems, the normally open electrical actuators are to be preferred as they are not supplied for most of the time involving a sensible electric energy saving. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R478 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally Open “NO” (R478) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1,5 m • Opening time at ambience temperature for R478/R478V/R478M/R478VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NC with open valve (R478M - R478MV) Normally dispatched in 3-4 days
Underfloor Heating T3 Control Group for Emmeti UFH Manifolds and Other ManifoldsQuick View from £159.00 £190.80 Inc VATThe nickel plated Underfloor Heating T3 UFH pump control unit includes full temperature management, complete with a pre-wired Wilo Yonos Para RS25/6-RKA high efficiency circulating pump, EuP class A, adjustable thermostatic mixing valve from 35°C to 60°C, built-in temperature gauge measuring mixed water temperature, 1"M swivel joints for fast connection to 1" female underfloor heating manifold. Each pump control group has a built-in non-return valve in the flow elbow to allow system to be flushed and filled very easily when commissioning the underfloor heating system. T3 Thermostatic mixing valve - dial type with tamper proof cover. T3 Pump Controller is suitable for any underfloor heating manifold with connections on 210mm centres such as Emmeti,Ivar,Uponor,Komfort and many other manifold suppliers. This unit is compatible Emmeti U9700090 T3 Control Group (thermostatic mixing valve and pump). Optional Quarter turn red and blue ball valves are available for fitting to 1” M flow and return connections offers savings eliminating the need to drain the system down.
“Manufacturer of the Year”
Pump Industry Awards – Finalists.
Wilo are proud to announce that we have been named finalists in the Pump Industry Awards 2016 “Manufacturer of the Year” category.
Polyplumb Replacement 2 Wire Underfloor Actuator 230v for UFCH Polyipe PB00401 and J G SpeedfitQuick View £15.59 £18.71 Inc VAT2 Wire - 230volts Underfloor Heating Manifold Actuator Compatible Replacement for Polypipe UFCH Polyplumb PB00401 This actuator was also used with Speedfit and will be a compatible replacement.
3/4″F x M Straight/Angled High Flow Valve with Thermostatic ControlQuick View £59.95 £71.94 Inc VAT3/4" BSP Angle/Straight Thermostatic Valve for high flow capacity. Thermostatically controllable valves are used to cut off and adjust flow through heating bodies. They can be equipped with thermostatic or manual head, or with motorised actuators such as Electro-thermal head. The thermostatic insert can be inspected and, if necessary, the spindle o-ring can be replaced even while the system is working. These valves can be mounted either as a straight or an angle valve according to requirements, simply by screwing the plug (also supplied) into the unused inlet. Max operating temperature 120 ° C Max operating pressure 10 bar. Thermostatic Head: Temperature range of 20 – 60° Celsius to enable the system to run at a floor surface temperature below 30° C M30 thread