Underfloor Heating Triple Spreader Plates 3 Channel Aluminium 600 x 1000mm
From £6.65 inc VAT
British Made Underfloor Heating Triple Spreader Plates 600 mm wide x 1000 mm to fit 600 mm joists centres with 200mm Pipe Centres, each spreader plate has pre-formed Omega shape channels / grooves to retain both 15mm and 16mm underfloor heating pipes securely.
The aluminium spreader plates will fit 600 mm wide floor joists
Each of Our Underfloor Heating Aluminium Spreader plates are made from high grade aluminium sheet, which we have had specially hardened to give extra rigidity.
Out of stock
Polyplumb Replacement 2 Wire Underfloor Actuator 230v for UFCH Polyipe PB00401 and J G SpeedfitQuick View £15.59 £18.71 Inc VAT2 Wire - 230volts Underfloor Heating Manifold Actuator Compatible Replacement for Polypipe UFCH Polyplumb PB00401 This actuator was also used with Speedfit and will be a compatible replacement.
Giacomini R478 Underfloor Heating Thermal Actuator – Normally Open 2 Wire 230 vQuick View £18.95 £22.74 Inc VATGiacomini Hep2o R478 Underfloor Heating Thermal Actuator 230v 2 wire R478V The actuators of the R478 series are normally open (NA). They allow them hydraulic supply of the circuits when there is no voltage and they have a cable with two conductor for the connection to room thermostats or adjustment regulators. The R478M version has a stroke end micro-switch for driving circulators or zone valves. The R478V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R478MV version has either varistor or stroke end micro-switch. In radiant panel heating and cooling systems, the normally open electrical actuators are to be preferred as they are not supplied for most of the time involving a sensible electric energy saving. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R478 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally Open “NO” (R478) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1,5 m • Opening time at ambience temperature for R478/R478V/R478M/R478VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NC with open valve (R478M - R478MV) Normally dispatched in 3-4 days
Mohlenhoff Underfloor Heating Actuator 24 volts – Thermoelectric 2 Wire / CoreQuick View £22.15 £26.58 Inc VATMohlenhoff Thermoelectric UFH Actuator Head 24 volt 2 Wire (2 core). Adaptor ring for connection on on to the underfloor heating manifolds with M30 thread (which is the most popular underfloor heating manifold thread size). This Underfloor Heating Actuator Head is made in Germany by Mohlenhoff
This Underfloor Heating actuator will replace a 2 wire Gabotherm, Polypipe Polyplumb, Wavin, Nuheat, Speedfit, Robins, Thermoboard actuators.
Underfloor Heating Aluminium Spreader Plates – (Select Qty) Double Groove Aluminium UFH Heat Diffusion PlatesQuick View £2.92 £3.50 Inc VATThis water underfloor heating aluminium diffuser plates / double spreader plates are designed for use with wet / piped underfloor heating systems. Aluminium UFH double heat diffuser / double spreader plate dimension are 1000 x 390 mm to suit ufh pipes sizes from 15 -16- 17 mm in diameter, each aluminium underfloor heating / UFH diffusion plate / spreader plate has twin / double preformed groves for pipes at 200 mm centres. These underfloor heating / UFH spreader plates have an omega shape grove to hold / clipping the pipe securely unlike a straight U channel spreader plates. Each water underfloor heating aluminium double spreader plate will cover a heated floor area of 1/2 m² allowing sufficient spacing between each spreader plate,and also at the edge of the room where the pipe turns 180° back into the spreader plate. The UFH double spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400 mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the ufh double spreader plate can be nailed, screwed or stapled onto the top of the floor joist or floor batten. The metal aluminium underfloor heating spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards and is a proven method of distributing the heat evenly. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m² at room temperature 20 deg. C. with a floor temperature of 27 deg Celsius. Any variation on either of the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh double spreader plate sits snugly beneath the floorboards giving direct contact to the floor board, which will then give the maximum heat transfer from your water underfloor heating system. Insulation should be fitted directly beneath the ufh spreader plate. All our UFH Aluminium / Underfloor Heating Spreader Plates are made to a high standard here in the UK. “Our spreader plates are unique in the way they are manufactured giving them extra strength which holds the pipe much better and will be less likely to crease, making them more robust.”with each UFH double Spreader plate being 1000 mm x 390 mm of high quality aluminium 1050a H 14 to carry UFH pipes 15, 16 & 17 mm diameter. We offer various types of ufh spreader plates within our on line shop, for large or bulk orders please contact the office for a price. We are also able to supply ufh triple channel aluminium heating spreader plates for underfloor heating systems which require pipes to be run at closer centres than 200mm. For installation of the double groove underfloor heating spreader plates please visit - http://www.underfloorspreaderplates.co.uk/ "a guide of how to fit the ufh double spreader plates".