The Heatmiser neoAir Bundle includes a neoAir, RF Switch and Desk Stand and is perfect for those looking to control their heating and hot water from a wireless thermostat in the home. The neoAir can operate in heating only mode or heating and hot water and so is perfect for those with combi boilers or hot water cylinders.
The neoAir can be wall or desk mounted.
Heating Only or Heating & Hot Water Control
Touch Key Operation
Wall or Desk Mount
Energy Saving Optimum Start – Save energy by allowing the neoAir to calculate and automatically adjust the amount of heat up time is required.
Flexible Programming – Your neoAir can be setup to work in 5/2 day, 7 day or 24 hour mode. 5/2 is ideal for those with different weekday/weekend schedules. 7 day is great for those with different schedules each day and 24 hour mode offers the same settings for every day – so perfect for those at home most days.
Comfortable Temperature – 4 Comfort levels per day, so you can for example have your home warm when you wake, a little lower whilst you are out at work, warmer in the evening whilst you relax and reduced further throughout the night whilst you sleep
The Heatmiser Slimline-RF Kit comprises of a Heatmiser Slimline-RF Multi Mode Thermostat and RF-Switch wireless receiver.
The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling.
The Heatmiser wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)
The Heatmiser RF Switch is a 2 Channel Receiver providing 2 changeover contacts, 1 for the heating circuit and 1 for the hot water circuit.
In addition, the RF Switch provides a volt free switch for the boiler. The RF Switch can be paired to the UH8-RF to provide a wireless link for the boiler signal.
Multi Mode: Can be setup to work in one of three following modes:-
Non Programmable Thermostat
Programmable Thermostat with Hot Water Output
Features of the Slimline RF Thermostat -
Wireless Thermostat Frequency - 868MHz
Heating & Hot Water Outputs
Wireless Distance: Up to 100 Meters Open Space
Large Back Lit Displayv Screen
5/2 or 7 Day Programming Modes
4 Comfort Levels per Day
Optimum Start time
Wireless Fail Safe Function
Choice of ºC/F Option
Temperature Range 05ºC - 35ºC
Frost Protection facility
Key Lock Facility
Battery: 2 x AAA (Included)
Compatible with UH8-RF & Heatmiser Boost
Remote Air Sensing Facility (Ideal for measuring the air temperature up to 20 meters from the thermostat, in bathrooms for example. Remote sensor probe will be required, not included)
Dimensions: 98 mm x 85 mm x 24 mm (Height, Width, Depth)
Warranty: 2 Year Direct Manufacturer Warranty
The Heatmiser RF-Switch is our surface mount 2 channel wireless receiver.
It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output to the boiler.
Total Maximum Load - 9 amp Resistive
IP protection - IP20
Vision RF Wireless Thermostat with 3 mtr Floor Sensor complete with Wall Mounted Radio Frequency Receiver
The Vision BT-DP02 RF remote programmable room thermostat offers the following outstanding features: