Underfloor Heating FFB 250mm Fit From Below Double Spreader Plates
From £5.12 inc VAT( £4.27 ex VAT )
The UK Made Komfort Underfloor Heating Double Spreader Plate, fit from below (FFB) aluminium spreader plates, the FFB double spreader plate system is designed to be installed from underneath the already fitted floor boards are already installed and underfloor heating is required.
The fit from below ( FFB) double heat spreader plate is designed for joist spacing of 400mm centres, where joist centres are wider – please contact us and we will quote you for your specific requirements. Pipe centres are 250 mm allowing maximum spreader plate contact with the underside of the floorboard.
UFH FFB Double Spreader Plate dimensions 1000 x 266 mm
Our FFB aluminium fit from below ufh double heat spreader plate also works well with TJI, Silent Floors,Eco Joists,BCI,Trus Joist Pozi-Joists.
Underfloor Heating Fit from Below Spreader J Plates – 40 Aluminium Plates Suspended Floor – FFB Clippa J ShapeQuick View £129.95 £155.94 Inc VAT (£129.95 ex VAT)
Box of 40 plates x Clippa J PlatesSuspended Floor J Shape Aluminium Underfloor Heating Fit from below (FFB) Spreader Plate are designed to be fitted beneath the floorboard. These plates can also be used with a FFB 150 to effectively create a triple fit from below plate. The J plate is designed for multiple joist spacings, allowing underfloor heating pipes to be installed at a variety of pipe centres by overlapping the plates where necessary, each plate will allow the pipe to easily clip in to position. The Single format J Plate is 1000 mm long x 180 mm wide x .05mm thick with single clip into channel, grooves are suitable for 16mm pipe, FFB Heating J Plates offer the same heat outputs as standard spreader plates of the same area.
Giacomini R478 Underfloor Heating Thermal Actuator – Normally Open 2 Wire 230 vQuick View £26.64 £31.97 Inc VAT (£26.64 ex VAT)Giacomini Hep2o R478 Underfloor Heating Thermal Actuator 230v 2 wire R478V The actuators of the R478 series are normally open (NA). They allow them hydraulic supply of the circuits when there is no voltage and they have a cable with two conductor for the connection to room thermostats or adjustment regulators. The R478M version has a stroke end micro-switch for driving circulators or zone valves. The R478V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R478MV version has either varistor or stroke end micro-switch. In radiant panel heating and cooling systems, the normally open electrical actuators are to be preferred as they are not supplied for most of the time involving a sensible electric energy saving. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R478 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally Open “NO” (R478) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1,5 m • Opening time at ambience temperature for R478/R478V/R478M/R478VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NC with open valve (R478M - R478MV) Normally dispatched in 3-4 days
Underfloor Heating Spreader Plates – 200 Double Groove Aluminium UFH Heat Diffusion PlatesQuick View From £707.95 inc VAT( £589.96 ex VAT)This water underfloor heating spreader plate pack comprises of 200 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 200 floor plates will cover a floor area of 100 m² (One Hundred Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
P Clips 16mm (5/8″) Nylon for Pipes & Cables Pack of 50Quick View £2.65 £3.18 Inc VAT (£2.65 ex VAT)The 16mm / 5/8"black Nylon clips are a split to cable clamp to hold cables and tubes, with the clip having specially rounded edges to protect cables, pipe and other components being held. The moulded hole allows a screw to hold the clamped p clip in position. Nylon P clip will hold wiring/pipes/tubing/cables/conduit securely in position. Nylon P Clips are sold in bags of 50