Esbe Underfloor Heating 3/4″ 3 port Mixing Valve and Actuator
£201.00 ( ex VAT £201.00 )
Esbe Actuator and 3 port Mixing Valve 3/4″BSP Connections with 4 wire actuator, compatible with the Uponor & Wirsbo Duomix 3 way valve
P Clips 16mm (5/8″) Nylon for Pipes & Cables Pack of 50Quick View £2.65The 16mm / 5/8"black Nylon clips are a split to cable clamp to hold cables and tubes, with the clip having specially rounded edges to protect cables, pipe and other components being held. The moulded hole allows a screw to hold the clamped p clip in position. Nylon P clip will hold wiring/pipes/tubing/cables/conduit securely in position. Nylon P Clips are sold in bags of 50
Uponor TMV 1002349 Wirsbo Duomix 3 Port Underfloor Heating Thermostatic Mixing Valve Uniset Mini VPG10 Replacement VTA372Quick View £140.40Esbe 3 port Mixing Valve Body with 3/4"BSP Connections, compatible with the Uponor & Wirsbo Duomix 3 way valve. TMV 1002349 and Uniset Mini / VPG10
Giacomini R478 Underfloor Heating Thermal Actuator – Normally Open 2 Wire 230 vQuick View £18.95Giacomini Hep2o R478 Underfloor Heating Thermal Actuator 230v 2 wire R478V The actuators of the R478 series are normally open (NA). They allow them hydraulic supply of the circuits when there is no voltage and they have a cable with two conductor for the connection to room thermostats or adjustment regulators. The R478M version has a stroke end micro-switch for driving circulators or zone valves. The R478V version has varistor for installation on places where the network voltage undergoes sudden changes that could damage the electronic components. The R478MV version has either varistor or stroke end micro-switch. In radiant panel heating and cooling systems, the normally open electrical actuators are to be preferred as they are not supplied for most of the time involving a sensible electric energy saving. Description In order to allow an optimal control of the room temperature, combining the energy saving with a high comfort, the use of electrical actuators on distribution manifolds, on radiator valves with thermostatic option, or on fancoil valves is advisable. The series of R478 electrical actuators is characterised by an absolute quiet operation, long lasting lifetime as it has no mechanism subjected to wear and a sufficiently slow closing to prevent from water hammer phenomenon. The operation mechanism is made of wax bulbs controlled by low consumption electrical PTC (Positive Temperature Coefficient). Technical data • Product in compliance with the Directives B.T. 73/23/CEE and 93/68/CEE and ENEC 03 Certificate • Product category: “Electrical actuators for assembly on radiators or radiant panel systems” • Condition in absence of voltage: - Normally Open “NO” (R478) • Linear motion • Valve working stroke 2,4 mm • Dust protection class 2 • Electrical discharge voltage 4 kV • Electrical enclosure to IP40 • Protection against direct contracts by means of double insulation (Class II) • Supply cable type H05 VV-F, useful length 1,5 m • Opening time at ambience temperature for R478/R478V/R478M/R478VM versions, 230 V - 24 V ≈ 6 minutes • Working room temperature: -5÷50 °C • Storage room temperature: -20÷65 °C • Casing material flame retardant PBT V0-UL94 • Vertical assembly above the valve, or horizontal • Rapid connection for Giacomini standard • Valve position mechanical indicator • Micro-switch NC with open valve (R478M - R478MV) Normally dispatched in 3-4 days
Overlay Underfloor Heating System 20m² – Gypsum Fermacell Kit with Pump Control Unit – Polypipe Polyplumb AlternativeQuick View £791.00
20m² Komfort Low Profile Underfloor Heating SystemKomfort 18 mm Low Profile Underfloor Heating System The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts /m² can be achieved (this will depend on floor finishes etc..) The UFH panels can be used on ground and upper floors. The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system. Approvals - European Technical Approval ETA-03/0050 eco-INSTITUT Tested Product: Certificate no ID 0907 – 13701 – 001 Certificate no ID 0907 – 13701 – 002 Certificate no ID 0907 – 13701 – 003 Copies of these certificate are available upon request. While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market. 10 year complete system guarantee (excluding any electrical components). This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility. Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements or your require a specific area, please telephone 01600 710909 for assistance.