Showing all 18 results
Heatmiser UH6 – 6 Zone Compact 230v Wiring CentreQuick View £69.00 Inc VATHeatmiser UH6 The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Heat & UFH Pump Delay When there’s a demand it is possible to set a timed delay, before activating the Pump & Heat* outputs Creepage Function During hot weather the heating may not be required as often, which means after long periods of the UFH pump not being used, the pump can seize and refuse to operate. To prevent this, it is good practice to operate the pump once a day, the creepage function does this for you. Once enabled the UH6 wiring centre will operate the pump for 1 minute, only if the outputs have not been operated by a thermostat, within the preceding 24 hours. This function does not operate the HEAT output. Up to 4 actuators can be connected to each zone.
- Central wiring for up to 6 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Actuator outputs: 230v
- Dimensions (LxHxD) 265x95mm
Underfloor Heating 4 Zone Master 230v Control Wiring Centre / Unit – Watts / KomfortQuick View £59.16 Inc VAT
Komfort 4 Zone Master Control Wiring Unit 230vwith Visible Heating Zones, Boiler and Pump Lights compatible with Polypipe and Speedfit Master wiring centres
Underfloor Heating 230v Wiring 4 Zone Slave Unit – Watts / KomfortQuick View £42.24 Inc VAT
Watts / Komfort Wiring 6 Zone Master Unit 230vQuick View £71.82 Inc VAT
Komfort Underfloor Heating Wiring 6 Zone Master Control Unit 230vwill control up to six individual temperature heating controlled zones
Underfloor Heating Wiring 6 Zone 230v Slave Unit – Watts / KomfortQuick View £51.36 Inc VAT
Emmeti EWC1 – 8 Zone 230v Wiring Centre U9360010Quick View £106.68 Inc VATThe Emmeti EWC1 Wiring centres feature independent boiler and pump relays, 8 zone terminal connection blocks for thermostats and electrothermic heads (four loose cap terminals are included to enable up to five actuators to connect to two zones*), These wiring centres also include an on - off switch to enable safe working inside the wiring centre and to thermostat and actuator connections. Each circuit has a LED that indicates when a zone is calling for heat. The centre includes connections for an external time-switch to enable both central time control of the thermostats and also night set back operation for suitable thermostats. Please see product Specification Below EWC-1-230v-wiring-centre-installation-instructions
Emmeti EWC2 – 8 Zone 230v Wiring Centre U9370001Quick View £75.60 Inc VAT
The Emmeti EWC-2 wiring centre available is in 8 way , 230V versions. Designed to allow central electrical control of wall hung radiator and underfloor heating systems. Each heating zone can be controlled independently via the 8 channel.
- Time switch terminals to allow central time control of multiple zones and night set back to thermostats, if required
- Earth continuity terminal to ensure all electrical components in the system are earthed correctly
- Pump 230V output terminals to allow connection of the manifold pump
- Volt free boiler terminals allow connection to wide range of heat sources
- Clearly marked terminals to ensure correct connection of components
- LED indicator to give visual identification of pump/boiler ‘ON’
- Potential to connect up to 5 actuators heads per channel for multi-loop zones
- Cable clamping enclosure ensure safe termination into the wiring centre
- Each channel allows connection of thermostat cable and electrothermic head/actuator which makes commissioning and fault finding simple
- Power ‘ON’ LED
Reliance Underfloor Heating 8 Way Wiring Centre – 230v RWC UFHQuick View £49.38 Inc VATRWC Reliance 230v Wiring Centre is designed to connect all elements of the water underfloor heating system. With a demand from the thermostat it will provide switched live to open actuator(s) relevant to the heating zone and will in turn automatically fire up the boiler and pump The wiring centre can receive up to 16 actuators (circuits) on maximum of 8 heating zones.
Watts Plug-In Two Zone System Timer P-2368Quick View £126.00 Inc VATThis Watts Plug in Timer is specifically designed to assemble to the end of either the Watts-Komfort Master or Slave units as seen in our wiring centre range (only 230v). One Timer per manifold is applicable. This Timer is used for Centralised controls between the 'Day' and 'Night' Settings, commonly refereed to as Setback Functions. This timer has the following functions:
- Two zone programmable timer with 7 day capability
- 2 Channels (A and B)
- 7 day weekly programming
- 9 built-in programs
- 1 user program per channel
- Program LCD graphic display
- Automatic or manual operation
- Keypad lock function for child safety
- Hours and parameters are saved in case of power cut
- CLOCK: Use this menu to adjust the Timer clock to the actual time.
- AUTOMATIC: The Timer follows automatically the selected program according to the actual time.
- REDUCED: Force reduced temperature operation indefinitely on the 2 Channel.
- COMFORT: Force comfort temperature operation indefinitely on the 2 Channels.
- Operating voltage: 230VAC +- 10%
- Operating temperature: 0-50°C (oder 32-122°F)
- Electrical protection: IP30
Heatmiser UH4 – 4 Zone 230v Wiring CentreQuick View £57.85 Inc VATThe Heatmiser UH4 can be used in conjunction with our mains supply thermostats. The Heatmiser UH4 is also ideally suited for water based underfloor heating systems. When used for under-floor heating an option is available to use the Zone 4 for conventional panel radiator control. The Heatmiser UH4 provides central switching of up to 4 zone actuators with output facility for a hot water cylinder and the system boiler and primary pump. Total Maximum Load - 5 amp Resistance Dimensions of UH4 - 384 mm x 148 mm x 60 mm IP Protection - IP 20 Warranty: 2 Year Direct Manufacturer Warranty
Heatmiser UH8 – 8 Zone 230v Wiring CentreQuick View £69.54 Inc VATThe Heatmiser UH8 is designed to work with the Heatmiser 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v programmable or room thermostat. Up to 8 zones can be controlled from the Heatmiser UH8 Wiring Centre. The Heatmiser UH8 has two heating time channels on board, each heating zone allows you to specify which time channel it should follow. There is also 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any heating zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. With a simple slide switch the Heatmiser UH8 make zone 8 control the radiators. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Up to 4 actuators can be connected to each heating zone. Total Maximum Load - 5 amp Resistive IP Protection - IP20 Dimensions (LxHxD) 384 mm x 148 mm x 60 mm Warranty: 2 Year Direct Manufacturer Warranty
Heatmiser UH8-N 8 Zone 12v Network Wiring CentreQuick View £119.99 Inc VATThe Heatmiser UH8-N is a central wiring switch box designed to be used with our 12v network thermostats. The UH8-N offers the following functionality;
- Central wiring to up to 8 zone actuators
- Output for under-floor heating valve and pump activated when any thermostat calls for heat
- Works with our low voltage thermostats.
- Output for a single radiator zone
- Output for domestic hot water
- Low voltage wiring to thermostats.
- Network connection to Heatmiser Touchpad
- Actuator outputs: 240V
- DIN Rail Mounting
Heatmiser UH8-RF 8 Zone Wireless Wiring CentreQuick View £115.19 Inc VATThe Heatmiser UH8-RF is a 8 Zone wireless wiring centre designed to work with the Heatmiser Slimline-RF, Touch-RF and neoAir Thermostats. The Heatmiser UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution. Up to 6 actuators can be connected to each zone. An external aerial is available for use when the Heatmiser UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted. A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve. Central wiring unit for up to 8 heating zones DIN Rail Mounting Option (DIN Rail not included) Output for underfloor heating valve and pump activated when any thermostat calls for heat Wireless Fail Safe Function Wireless Boiler Link (RF Switch Optional) Works with our Heatmiser Slimline-RF and Heatmiser Touch-RF) Output for multiple radiator zones Output for domestic hot water Output for underfloor heating valve and pump activated when any thermostat calls for heat Actuator outputs: 230 volts Dimensions (LxHxD) 384 mm x 148 mm x 60 mm Warranty:2 Year Direct Manufacturer Warranty
Heatmiser EA1 – Extended AreaQuick View £14.21 Inc VATThis external aerial is designed to work with the UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.
24v 4 Zone Underfloor Heating Master Control Wiring Centre / Unit – Watts / KomfortQuick View £62.94 Inc VAT
Komfort 4 Zone 24 v Master Control Wiring Unit with Visible Heating Zones, Boiler and Pump Lightswill allow up to 4 underfloor heating zones, for additional zone also select the 24v slave wiring unit Please note a transformer is required with this unit and will need to be purchase separately link below https://underfloorparts.co.uk/product/230v-24v-watts-transformer-p-2080-polypipe-polyplumb/
24v Underfloor Heating 4 Zone Slave Unit – Watts / KomfortQuick View £46.02 Inc VAT
230v / 24v Watts Transformer P-2080Quick View £71.10 Inc VAT230v / 24v Watts Transformer P-2080 for use with 24v Wiring Centre Compatible with Polypipe
8 Way 24v Underfloor Heating Wiring Centre incl. Transformer – SeitronQuick View £178.80 Inc VAT8 way 24 v Underfloor Heating Wiring Centre complete with 24v Transformer, display lights showing when calling for heat.