Emmeti FMU3 Floor Mixer Manifold Set

The Emmeti FMU3 manifold is suitable for use with low-temperature systems. Whilst the assembly includes a mixing point the temperature control can be set to as low as 20°C. Unlike many mixing sets that require a water temperature of at least 15˚C higher than the set point, the FMU3 will blend to a minimal point. Using an FMU3 manifold with these systems avoids flow rate issues across the manifold.
Emmeti are specialists in the manufacture of pipe, components, and controls for the underfloor heating market.

Showing all 22 results

  • Emmeti FMU3 – Floor Mixing Unit with 2 Port Underfloor Heating Manifold

    Quick View from   £277.98   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with 2 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flowmeters and lockshield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works  
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 2 Port Underfloor Heating Manifold

    Quick View from   £305.00   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with 2 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 3 Port UFH Manifold

    Quick View from   £291.18   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with 3 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flowmeters and lockshield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 3 Port UFH Manifold

    Quick View from   £318.12   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with 3 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flowmeters and lockshield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 4 Port Underfloor Manifold

    Quick View from   £304.74   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  4 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works  
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 4 Port Underfloor Manifold

    Quick View from   £331.74   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  4 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 5 Port Underfloor Heating Manifold

    Quick View from   £316.20   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  5 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works  
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 5 Port Underfloor Heating Manifold

    Quick View from   £345.60   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  5 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 6 Port Underfloor Heating Manifold

    Quick View from   £332.34   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  6 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 6 Port Underfloor Heating Manifold

    Quick View from   £359.34   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  6 Port Underfloor Heating Manifold and Ball Valves  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 7 Port Underfloor Heating Manifold

    Quick View from   £346.38   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  7 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 7 Port Underfloor Heating Manifold

    Quick View from   £373.32   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  7 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 8 Port Underfloor Heating Manifold

    Quick View from   £358.80   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 8 Port Underfloor Heating Manifold

    Quick View from   £387.30   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 9 Port Underfloor Heating Manifold

    Quick View from   £374.10   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 9 Port Underfloor Heating Manifold

    Quick View from   £401.10   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 10 Port Underfloor Heating Manifold

    Quick View from   £387.60   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  10 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 10 Port Underfloor Heating Manifold

    Quick View from   £414.72   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  10 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 11 Port Underfloor Heating Manifold

    Quick View from   £402.14   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  11 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 11 Port Underfloor Heating Manifold

    Quick View from   £429.12   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  11 Port Underfloor Heating Manifold and Ball Valves  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit with 12 Port Underfloor Heating Manifold

    Quick View from   £415.80   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  12 Port Underfloor Heating Manifold  The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
  • Emmeti FMU3 – Floor Mixing Unit Plus BV – 12 Port Underfloor Heating Manifold

    Quick View from   £442.74   Inc VAT
    Emmeti Pre - Assembled 1” FMU3  Floor Mixing Set with  12 Port Underfloor Heating Manifold and Ball Valves The Emmeti FMU3 manifold and control group has been manufactured for use with underfloor heating and other central heating systems. The Emmeti FMU3 manifold has been factory tested to 10 BAR Pressure and includes a thermostatic mixing valve with sensor, high efficiency Grundfos UPM3 Auto circulating pump with a 7m head, temperature gauge, integral automatic air vent and non-return valve for simplified system filling. The manifold has a double regulating flow meters and lock shield valves fitted to the flow bar. The return bar includes seating for actuator heads from 24 v to 230 v with both 2 and 4 wire models. The mixing valve assembly is designed to supply a set mixed temperature from 20˚C to 65˚C which will suit a wide range of applications. This pump set is one of the very few available in the UK that complies with the building regulation requirements for the low temperatures required in the initial commissioning of underfloor heating of screed floors. The manifolds can be used as a multiple zone heating systems or as a single room heating system. This Floor Mixing Set with Heating Manifold comprises of - Floor mixing unit with low temperature underfloor heating manifold with flow regulators, Grundfos UPM Auto 7m head pump and pipe connectors of your selection. How this mixer works
MENU