Underfloor Heating Floor Fixing Components
There are a wide range of fixing the underfloor heating pipe to the suspended wooden floors to solid screed floors.
Showing all 22 results
-
25mm Underfloor Heating Floating Floor Insulation Panels (Pack of 10)
Quick View £103.00Komfort Floating Floor Panels (1200mm x 600mm x 25mm are ideal for installations where a finished floor is required within a minimum time scale. The EPS 150 insulation panel are has 150mm pipe centres pre grooved for 15 and 16 mm accommodate pipework Eliminates the drying time from wet screed, making it a very fast system to install and means no waiting time before the laying the wooden flooring such as engineered wooden flooring, tongue and groove floorboards, or 18mm chipboard. The Komfort Floating Floor Panel system is suitable for individual homes to commercial premises. The Floor panels are simply installed on to the existing floor, this can be either a solid concrete/ screed floor or a suitable wooden structurally sound floor of 18mm minimum thickness ( Chipboard, Floorboards or Plywood) Komfort EPS panels are pre-routed in different patterns and are covered with a high tech aluminium foil. The foil distributes the heat evenly across the entire floor surface, the warm up time is drastically reduced compared to traditional wet screed systems. the insulation panels are ready for your suitable wooden floor covering on top. Low tog value floor finishes should used (please check with your flooring company). We don't recommend Tiling directly on top of panels, where this is required please use our Fermacell Boards -
Underfloor Heating Plastic Castellated Floor Panels 30mm x Qty 100
Quick View £539.00100 x Molded Plastic Castellated Floor Panels / Egg Box Trays 100% Recycled Plastic
Proud to be Made here in the UK
The Floor Panels will give optimum perform in your Underfloor Heating System, the floor trays allows for a fast installation together with accurate fixing of underfloor heating pipes. The knob system floor tray holds the pipe securely in place by the castellated knobs, the underfloor panel also acts as a pipe fixing template ensuring accurate spacing of pipes allowing a even heat distribution. Our unique floor panels are lightweight and can be easily cut to size to fit any room shape.
The underfloor pipe trays are provided in black, they are neatly overlapped to create a fully interlocking continuous grid floor panel ready for the pipes which can be fixed at 100, 200 & 300 mm pipe centres. This floor panel will interlock with the red floor panels with dimensions of 1.20 x 1.0 m with 100 mm pipe centres.
The underfloor pipes are securely held in position before and during the laying of the floor screed.
Features and Benefits
- Made from Recycled High Impact Polystyrene
- Easy to install
- Minimum amount of waste
- Eliminates pipe contact with insulation
- Total size 1220 mm x 820 mm x 30 mm
- Pipe Centres can be at 100 mm, 200 mm & 300 mm
- Each Panel will cover approx 1 square metre
- Ideal for use with heat pumps
- Pipe Diameter 15 mm - 16 mm
-
Underfloor Heating Overlay Gypsum Boards Komfort 18 Universal 1200 x 600 x 18mm x 5 Pack
Quick View £97.50Pack of 5 x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18 mm which will cover 3.6 m² floor area.
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
For Jointing Glue click this link Jointing Adhesive
For Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 10 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £275.0010 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 14 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 15 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £409.0015 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 21 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 20 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £546.0020 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 28 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 25 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £682.5025 m² Pack x Komfort 18 Universal Overlay Underfloor Heating Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 35 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 30 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £819.0030 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 42 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 35 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £955.5035 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 49 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 40 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £1,092.0040 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 56 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe click this link 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
Larger Quantities P.O.A
We also sell these board in Overlay system ufh kits/packs
-
Environmentally Friendly Fermacell Flexible Sealant / Adhesive
Quick View £3.99New Flexible Sealant and Adhesive for Fermacell Underfloor Heating Boards and much more......
This Non-Reactive Environmentally Friendly Chemistry is compatible with most building materials. Emission Free All Purpose Sealant, Colour - White Adheres to -- Ceramic
- Concrete
- Masonary
- Gypsum
- Metals
- Plastics Stone
- Wood
- Does Not Yellow
- Dynamic Movement
- Easy Clean up
- Eco Friendly
- Fire Rated
- Flexible
- High Grip
- Interior Use
- Mould Resistant
- Multiple Substrates
- Non Staining
- Non Toxic
- Paintable
- Quick Drying
- Sound Resistant
-
Underfloor Heating Overlay Fermacell Gypsum Boards – 5 m² Komfort 18 mm Universal UFH Pipe Layout
Quick View £136.505 m² Pack x Komfort 18 Universal Underfloor Heating Overlay Fermacell Gypsum Boards 1200 x 600 x 18mm
The Komfort underfloor heating low profile floor system is the perfect solution for both renovation and new build projects. This Komfort Overlay system can be installed over the existing floor with a low build height of only 18 mm. When using these Komfort underfloor heating panels, the costly need to remove any existing floors is eliminated as the UFH Overlay panels can very simply fit on top of the existing floor. This pack consists of 7 boards 1.2 mtr. x .6 mtr.
The Komfort UFH Overlay panel offers the perfect answer for a wood or tile floor finish. The Overlay panel design contributes to an easier installation when using these floor finishes and furthermore, when using with a ceramic floor finish, an outstanding 99 watts / mtr² can be achieved (this will depend on floor finishes etc..)
The UFH panels can be used on ground and upper floors.
The Komfort UFH 18 mm Overlay panels are DFE (gypsum fibre) made from non flammable Fermacell Gypsum Fibreboard which offers top quality dry flooring elements (DFE), and will integrate with any existing heating system with 150 mm pipe centres for 12 mm pipe.
Approvals - European Technical Approval ETA-03/0050
eco-INSTITUT Tested Product:
Certificate no ID 0907 – 13701 – 001
Certificate no ID 0907 – 13701 – 002
Certificate no ID 0907 – 13701 – 003
Copies of these certificate are available upon request.
While some Overlay panels offer only one option of pipework layout, another benefit of the Komfort Overlay DFE Panel is the practicality of installation as it offers the user a choice of pipework design. In addition to this, a quicker installation can be achieved due to the superior design of the Komfort Overlay panels as the need for return panels is eliminated. This allows the 1200 mm x 600 mm universal panels and Komfort 12 mm 5 Layer PE-RT oxygen barrier pipe to be installed with greater ease, making it one of the most flexible Overlay fixing systems in the market.
10 year complete system guarantee (excluding any electrical components).
for Jointing Glue click this link Jointing Adhesive
for Komfort 12 mm Overlay Pipe 12 mm Overlay Pipe
For Overlay Heating Kits please go to Underfloor Heating Packs - Overlay Underfloor Systems
This pack is heavy and requires unloading facilities, PALLET DELIVERY to England, Wales, Scottish Lowlands and mainland. If there is no unloading facility on site please contact the number below to arrange for a tail lift facility.
Any Deliveries to Islands and Scottish Highlands price on application.
If you are uncertain of your requirements please telephone 01600 710909 for assistance.
We also sell these board in Overlay system ufh kits/packs
-
Underfloor Heating Clip Rail with Integrated Barbed Hooks Rapid Fix
Quick View £0.97Rapid Fix Clip rail track is ideal when using warm water underfloor heating within a screed or concrete floors. Each 1 mtr rail length can be joined by simply pushing together with a snap off point at every 100mm to get the appropriate length required The cliprail track is mounted on to the vapour - underfloor pipework is clipped in to place. Additional holding pins can also be used if required. A guide for the required amount is approximately area to be heated x 1.5 (ie 20m² x 1.5 = 30 lengths) Suitable for pipes from 15 mm - 20 mm outside diameter Length - 1000 mm Width - 40 mm Fitted Height - 25 mm Barb length 25 mm Colour -Black Material -Polypropylene. For Bulk Orders please call -
Underfloor Heating Clip Rail Track x 1mtr Self Adhesive
Quick View £0.85Clip rail track is ideal when using warm water underfloor heating within a screed or concrete floors. The cliprail track is mounted on to the vapour - insulatin with using the self adhesive rail backing and held in place whilst the underfloor pipework is clipped in place. Holding Pins can also be used if required. Supplied in 1 mtr. lengths simply push together each length to extend and snap off at pre-scored points to the required length. A guide for the required amount is approximately area to be heated x 1.5 (ie 20m² x 1.5 = 30 lengths) Suitable for pipes from 15 mm - 20 mm outside diameter Length - 1000 mm Width - 40 mm Height 25mm Colour -Black Fixing Self Adhesive Tape and or holding pins Material -Polypropylene.. For Bulk Orders please call -
Underfloor Heating Tacker Clips 60mm long x Qty 300
Quick View £5.85Tacker U clips x 60mm length U clips – suitable for pipes with a diameter of 14mm – 20mm. Sold in boxes quantities of 300 For use with a tacker gun. For larger quantities prices on application. -
Underfloor Heating Tacker U Clips 40 mm x 300
Quick View £4.49Tacker U clips x 40mm long clips - suitable for pipes with a 14 mm to 20 mm, clips are in box quantities of 300 For use with a tacker gun.- For any larger quantity Price on application
-
Underfloor Heating Holding Pins, Manual Pipe Clips 60mm / bag 100
Quick View £2.99
The extra long holding pin or manual pipe fixing clip can also be used fixing Clip Rail, with its 60 mm length it offers additional strength in the fixing into the insulation and can hold the pipe firmly, for extra security the holding pin/clip can be pushed at an angle into the insulation.
The 60 mm holding pins are supplied in bag quantities of 100 -
Underfloor Heating Plastic Castellated Floor Panels 20mm Qty 100
Quick View £539.00100 x Molded Plastic Castellated Floor Panels / Egg Box Trays 100% Recycled Plastic at 50mm Pipe Centres only 20mm High
Proud to be Made here in the UK
100 x Floor Panels will give optimum perform in your Underfloor Heating System, the floor trays allows for a fast installation together with accurate fixing of underfloor heating pipes. The knob system floor tray holds the pipe securely in place by the castellated knobs, the underfloor panel also acts as a pipe fixing template ensuring accurate spacing of pipes allowing a even heat distribution. Our unique floor panels are lightweight and can be easily cut to size to fit any room shape.
The underfloor pipe trays are provided in black, they are neatly overlapped to create a fully interlocking continuous grid floor panel ready for the pipes which can be fixed at 50, 100, 150,200, 250 & 300 mm pipe centres.
The underfloor pipes are securely held in position before and during the laying of the floor screed.
Features and Benefits
- Made from Recycled High Impact Polystyrene
- Easy to install
- Minimum amount of waste
- Eliminates pipe contact with insulation
- Total size 1220 mm x 820 mm x 30 mm
- Pipe Centres can be at 50mm ,100 mm,150mm, 200 mm, 250mm & 300 mm
- Each Panel will cover approx 1 square metre
- Ideal for use with heat pumps
- Pipe Diameter 15 mm - 16 mm
The more you buy the cheaper the price becomes, for bulk quantities above 1000 trays, please call us and we will quote you accordingly.
-
Underfloor Heating Plastic 20mm Low Profile High Castellated Floor Panels
Quick View £4.15Low Profile 20mm Molded Plastic Castellated Floor Panels / Egg Box Trays 100% Recycled Plastic
Proud to be Made here in the UK
The Floor Panels will give optimum perform in your Underfloor Heating System, the floor trays allows for a fast installation together with accurate fixing of underfloor heating pipes. The knob system floor tray holds the pipe securely in place by the castellated knobs, the underfloor panel also acts as a pipe fixing template ensuring accurate spacing of pipes allowing a even heat distribution. Our unique floor panels are lightweight and can be easily cut to size to fit any room shape.
The underfloor pipe trays are provided in black, they are neatly overlapped to create a fully interlocking continuous grid floor panel ready for the pipes which can be fixed at 100, 200 & 300 mm pipe centres. This floor panel will interlock with the red floor panels with dimensions of 1.20 x 1.0 m with 100 mm pipe centres.
The underfloor pipes are securely held in position before and during the laying of the floor screed.
Features and Benefits
- Made from Recycled High Impact Polystyrene
- Easy to install
- Minimum amount of waste
- Eliminates pipe contact with insulation
- Total size 1220 x 820 x 20mm high
- Pipe Centres can be at 50 mm, 100 mm & 150 mm and so on
- Each Panel will cover approx 1 square metre
- Ideal for use with heat pumps
- Pipe Diameter 15 mm - 16 mm
-
Underfloor Heating Plastic Castellated Floor Panels 30mm (Select Qty)
Quick View £4.99The Molded Plastic Castellated Floor Panels / Egg Box Trays 100% Recycled Plastic
Proud to be Made here in the UK
The Floor Panels will give optimum performance in your Underfloor Heating System, the floor trays allow for a fast installation together with accurate fixing of underfloor heating pipes. The knob system floor tray holds the pipe securely in place by the castellated knobs, the underfloor panel also acts as a pipe fixing template ensuring accurate spacing of pipes allowing a even heat distribution. Our unique floor panels are lightweight and can be easily cut to size to fit any room shape.
The underfloor pipe trays are provided in black, they are neatly overlapped to create a fully interlocking continuous grid floor panel ready for the pipes which can be fixed at 100, 200 & 300 mm pipe centres. This floor panel will interlock with the red floor panels with dimensions of 1.20 x 1.0 m with 100 mm pipe centres.
The underfloor pipes are securely held in position before and during the laying of the floor screed.
Features and Benefits
- Made from Recycled High Impact Polystyrene
- Easy to install
- Minimum amount of waste
- Eliminates pipe contact with insulation
- Total size 1220 mm x 820 mm x 30 mm
- Pipe Centres can be at 100 mm, 200 mm & 300 mm
- Each Panel will cover approx 1 square metre
- Ideal for use with Boilers
- Pipe Diameter 15 mm - 16 mm
Prices from £4.15
The more you buy the cheaper the price becomes, for bulk quantities above 1000 trays, please call us and we will quote you accordingly.
-
Underfloor Heating Aluminium Spreader Plates – (Select Qty) Double Groove Aluminium UFH Heat Diffusion Plates
Quick View £3.24This water underfloor heating aluminium diffuser plates / double spreader plates are designed for use with wet / piped underfloor heating systems. Aluminium UFH double heat diffuser / double spreader plate dimension are 1000 x 390 mm to suit ufh pipes sizes from 15 -16- 17 mm in diameter, each aluminium underfloor heating / UFH diffusion plate / spreader plate has twin / double preformed groves for pipes at 200 mm centres. These underfloor heating / UFH spreader plates have an omega shape grove to hold / clipping the pipe securely unlike a straight U channel spreader plates. Each water underfloor heating aluminium double spreader plate will cover a heated floor area of 1/2 m² allowing sufficient spacing between each spreader plate,and also at the edge of the room where the pipe turns 180° back into the spreader plate. The UFH double spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400 mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the ufh double spreader plate can be nailed, screwed or stapled onto the top of the floor joist or floor batten. The metal aluminium underfloor heating spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards and is a proven method of distributing the heat evenly. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m² at room temperature 20 deg. C. with a floor temperature of 27 deg Celsius. Any variation on either of the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh double spreader plate sits snugly beneath the floorboards giving direct contact to the floor board, which will then give the maximum heat transfer from your water underfloor heating system. Insulation should be fitted directly beneath the ufh spreader plate. All our UFH Aluminium / Underfloor Heating Spreader Plates are made to a high standard here in the UK. “Our spreader plates are unique in the way they are manufactured giving them extra strength which holds the pipe much better and will be less likely to crease, making them more robust.”with each UFH double Spreader plate being 1000 mm x 390 mm of high quality aluminium 1050a H 14 to carry UFH pipes 15, 16 & 17 mm diameter. We offer various types of ufh spreader plates within our on line shop, for large or bulk orders please contact the office for a price. We are also able to supply ufh triple channel aluminium heating spreader plates for underfloor heating systems which require pipes to be run at closer centres than 200mm. For installation of the double groove underfloor heating spreader plates please visit - http://www.underfloorspreaderplates.co.uk/ "a guide of how to fit the ufh double spreader plates". -
Conservatory Water Underfloor Heating Pack
Quick View £299.00Conservatory Water Underfloor Heating Pack up to 20 sq. metres
