Showing all 17 results

• 

  Underfloor Heating Fit from Below Spreader J Plates – 40 Aluminium Plates Suspended Floor – FFB Clippa J Shape

  Quick View £129.95 £155.94 Inc VAT
  (£129.95 ex VAT)  

  Box of 40 plates x Clippa J Plates

  Suspended Floor J Shape Aluminium Underfloor Heating Fit from below (FFB) Spreader Plate are designed to be fitted beneath the floorboard. These plates can also be used with a FFB 150 to effectively create a triple fit from below plate. The J plate is designed for multiple joist spacings, allowing underfloor heating pipes to be installed at a variety of pipe centres by overlapping the plates where necessary, each plate will allow the pipe to easily clip in to position. The Single format J Plate is 1000 mm long x 180 mm wide x .05mm thick with single clip into channel, grooves are suitable for 16mm pipe, FFB Heating J Plates offer the same heat outputs as standard spreader plates of the same area.    
• 

  Underfloor Heating FFB 250mm Fit From Below Double Spreader Plates

  Quick View From £5.12 inc VAT
  ( £4.27 ex VAT)
  The UK Made Komfort Underfloor Heating Double Spreader Plate,  fit from below (FFB) aluminium spreader plates, the FFB double spreader plate system is designed to be installed from underneath the already fitted floor boards are already installed and underfloor heating is required. The fit from below ( FFB) double heat spreader plate is designed for joist spacing of 400mm centres, where joist centres are wider - please contact us and we will quote you for your specific requirements. Pipe centres are 250 mm allowing maximum spreader plate contact with the underside of the floorboard. UFH FFB Double Spreader Plate dimensions 1000 x 266 mm Our FFB aluminium fit from below ufh double heat spreader plate also works well with TJI, Silent Floors,Eco Joists,BCI,Trus Joist  Pozi-Joists.
• 

  Underfloor Heating 150 mm x 1000 mm FFB (Fit from Below) Spreader Plates

  Quick View From £4.36 inc VAT
  ( £3.63 ex VAT)
  The UK Made Komfort Underfloor Heating Spreader Plate,  fit from below (FFB) double aluminium spreader plates, the FFB spreader plate system is designed to be installed from underneath the already fitted floor boards are already installed and underfloor heating is required. FFB150 is an aluminium heat spreader plate that holds the UFH tube flush against the under side of the flooring deck, either between or on top of joists. Highly conductive, it rapidly transfers heat through the floor deck into the room above, efficiently and effectively. The plates are exceptionally light and offer a good heat output and response time. ✔ Suitable for new build, extensions and renovation projects ✔ No height build-up, sits under floor board within the floor structure ✔ Can be run 2 plates per 400mm joist spacing giving 4 pipe runs per bay, or 3 plates giving 6 pipe runs at 600 mm wide joist centres ✔ Can be used with a J shape Plate for 3 pipe runs per a bay ✔ Quick to install FFB150 is a flexible solution that is can installed in suspended timber floors from either above when used a 1 FFB plate per a bay before the deck is laid, or from below, after the deck has been laid. The plates are usually stapled with a hand staple gun for a quick installation. The FFB 150 UFH Spreader Plates are British Made for High Grade Aluminium which ensures each FFB150 spreader plate holds the pipe securely in position. The fit from below aluminium ( FFB) double heat spreader plate is designed for joist from 300 mm to 600 mm centres, making them ideal for use with Heat Pumps where closer pipe centres are required. UFH FFB Spreader Plate overall dimensions 1000 x 150 mm with double pipe channels Our FFB aluminium fit from below ufh double heat spreader plate also works well with TJI, Silent Floors,Eco Joists,BCI,Trus Joist  Pozi-Joists.
• 

  Underfloor Heating Spreader Plates – 10 Aluminium Double Groove UFH Heat Diffusion Plates

  Quick View £49.86 £59.83 Inc VAT
  (£49.86 ex VAT)  
  This water underfloor heating spreader plate pack  comprises of 10 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel spreader plates. This water underfloor heating aluminium spreader plate pack of 10 plates will cover a floor area of 5 m² (Five Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh triple channel aluminium heating spreader plates for underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 20 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View £93.36 £112.03 Inc VAT
  (£93.36 ex VAT)  
  This water underfloor heating spreader plate pack comprises of 20 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 20 aluminium plates will cover a floor area of 10 m² (Ten Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 30 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View £127.31 £152.77 Inc VAT
  (£127.31 ex VAT)  
  This pack comprises of 30 x Aluminium Double Spreader Plates 1000 x 390 mm for 15 - 17 mm Pipes, Preformed Groves for pipes at 200 mm centres. These spreader plates has an omega shape grove to hold the pipe secure unlike a straight U channel spreader plates. This pack of 30 plates will cover a floor area of 15 m² (Fifteen Metre Square).   For Large or Bulk orders please contact the office for a price.
• 

  40 x Aluminium Underfloor Double Spreader Plates

  Quick View From £173.15 inc VAT
  ( £144.29 ex VAT)

  40 Aluminium Underfloor Spreader Plates

  This water underfloor heating spreader plate pack comprises of 40 Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These diffusion underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 20 aluminium plates will cover a floor area of 20 m² (Twenty Metre Square) 1000mm x 390mm double ufh spreader plate is often known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers / diffusing the heat efficiently to the underside of the floor board. The aluminium diffusion underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate.    
• 

  Underfloor Heating Spreader Plates – 40 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View From £173.15 inc VAT
  ( £144.29 ex VAT)
  This water underfloor heating spreader plate pack comprises of 40 Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These diffusion underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 40 aluminium plates will cover a floor area of 20 m² (Twenty Metre Square) 1000mm x 390mm double ufh spreader plate is often known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers / diffusing the heat efficiently to the underside of the floor board. The aluminium diffusion underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output           ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 120 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View From £473.60 inc VAT
  ( £394.67 ex VAT)
  This water underfloor heating spreader plate pack comprises of 120 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plate. This water underfloor heating aluminium spreader plates comprises of  120 floor plates will cover a floor area of 60m² (Sixty Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures  this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 160 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View From £615.18 inc VAT
  ( £512.65 ex VAT)
  This water underfloor heating spreader plate pack comprises of 160 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 160 floor plates will cover a floor area of 80 m² ( Eighty Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 240 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View £764.21 £917.05 Inc VAT
  (£764.21 ex VAT)  
  This water underfloor heating spreader plate pack comprises of 240 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 240 floor plates will cover a floor area of 120 m² (One Hundred andTwenty Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate.  For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 80 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View From £336.11 inc VAT
  ( £280.09 ex VAT)
  This water underfloor heating spreader plate pack comprises of 80 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate comprises of 80 floor plates will cover a floor area of 40m² (Fourty Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate. For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.
• 

  Underfloor Heating Spreader Plates – 200 Double Groove Aluminium UFH Heat Diffusion Plates

  Quick View From £766.43 inc VAT
  ( £638.69 ex VAT)
  This water underfloor heating spreader plate pack comprises of 200 x Aluminium UFH Double Spreader Plates 1000 x 390 mm to suit pipe diameters from 15 - 17 mm, each aluminium spreader plate has performed groves for ufh pipes at 200 mm centres. These underfloor heater spreader plates has an omega shape grove to hold the underfloor pipe secure unlike a straight U channel ufh spreader plates. This water underfloor heating aluminium spreader plate pack of 200 floor plates will cover a floor area of 100 m² (One Hundred Metre Square) 1000mm x 390mm double ufh spreader plate also known as aluminium diffusion plates for suitable for 15mm 16mm and 17mm underfloor heating pipes. The UFH spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the spreader plate can be nailed, screwed or stapled onto the top of the floor joist. The metal spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m2 at room temperature 20 deg. Celsius with a floor temperature of 27 deg Celsius. Any variation on either the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your underfloor heating system. Insulation should be fitted directly beneath the spreader plate.  For Large or Bulk orders please contact the office for a price. We are also able to supply ufh single and triple channel aluminium heating spreader plates for water underfloor heating systems which require pipes to be run at closer centres than 200mm.  
• 

  Underfloor Heating Aluminium Spreader Plates – (Select Qty) UFH Double Groove Diffusion Plates

  Quick View From £3.80 inc VAT
  ( £3.17 ex VAT)
  This water underfloor heating aluminium diffuser plates / double spreader plates are designed for use with wet / piped underfloor heating systems. Aluminium UFH double heat diffuser / double spreader plate dimension are 1000 x 390 mm to suit ufh pipes sizes from 15 -16- 17 mm in diameter, each aluminium underfloor heating / UFH diffusion plate / spreader plate has twin / double preformed groves for pipes at 200 mm centres. These underfloor heating / UFH spreader plates have an omega shape grove to hold / clipping the pipe securely unlike a straight U channel spreader plates. Each water underfloor heating aluminium double spreader plate will cover a heated floor area of 1/2 m² allowing sufficient spacing between each spreader plate,and also at  the edge of the room where the pipe turns 180° back into the spreader plate. The UFH double spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400 mm centres (should the joist spaces vary this can be usually overcome on site). The double groove ufh spreader plates have preformed channels with pipe centres of 200 mm, the ufh double spreader plate can be nailed, screwed or stapled onto the top of the floor joist or floor batten. The metal aluminium underfloor heating spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards and is a proven method of distributing the heat evenly. The aluminium underfloor heating spreader plates will give the UFH heat output of 77 watts per m² at room temperature 20 deg. C. with a floor temperature of 27 deg Celsius. Any variation on either of the these two temperatures this will vary the heat output ( or -) from the underfloor heating system. We recommend that the ufh double spreader plate sits snugly beneath the floorboards giving direct contact to the floor board, which will then give the maximum heat transfer from your water underfloor heating system. Insulation should be fitted directly beneath the ufh spreader plate. All our UFH Aluminium / Underfloor Heating Spreader Plates are made to a high standard here in the UK. “Our spreader plates are unique in the way they are manufactured giving them extra strength which holds the pipe much better and will be less likely to crease, making them more robust.”with each UFH double Spreader plate being 1000 mm x 390 mm of high quality aluminium 1050a H 14 to carry UFH pipes 15, 16 & 17 mm diameter. We offer various types of ufh spreader plates within our on line shop, for large or bulk orders please contact the office for a price. We are also able to supply ufh triple channel aluminium heating spreader plates for underfloor heating systems which require pipes to be run at closer centres than 200mm. For installation of the double groove underfloor heating spreader plates please visit - http://www.underfloorspreaderplates.co.uk/  "a guide of how to fit the ufh double spreader plates".
• 

  Underfloor Heating Triple Aluminium Spreader Plates – (Select Qty) Triple Groove UFH Heat Diffusion Plates

  Quick View From £4.38 inc VAT
  ( £3.65 ex VAT)
  3.22This water underfloor heating aluminium spreader plate Aluminium UFH Triple Spreader Plates dimension are 1000 x 390 mm to suit underfloor heating  pipes from 15, 16 & 17 mm in diameter, each aluminium spreader plate has  triple preformed groves for pipes at 150 mm centres. These triple groove aluminium underfloor heating spreader plates has an omega shape grove to hold the pipe secure unlike a straight U channel UFH spreader plates. Each water underfloor heating aluminium spreader plate will cover an effective heated floor area of 0.5 m² . The UFH triple grove spreader plates are suitable for suspended floor systems and are fitted on top of floor joists or battens at the standard 400mm centres (should the joist spaces vary this can be usually overcome on site). The triple groove ufh spreader plates have preformed channels with pipe centres of 150 mm, the underfloor heating triple grove spreader plate can be nailed, screwed or stapled onto the top of the floor joist or floor batten. The metal aluminium underfloor heating 3 channel spreader plates are one of the most effective ways by giving a homogeneous heat transfer to the underside of wooden floor - floor boards. With aluminium like most metals it makes an excellent heat conductor and transfers the heat efficiently to the underside of the floor board. The aluminium underfloor heating triple grove spreader plates will give the UFH heat output of 77 watts per m² at room temperature 20°C. with a floor temperature of 27°C. Any variation on either the these temperatures this will vary the heat output ( /-) from the underfloor heating system. We recommend that the triple channel ufh spreader plate sits tightly beneath the floorboards giving direct contact which will offer the maximum heat transfer from your water underfloor heating system in to the floor. Insulation should be fitted directly beneath the underfloor heating spreader plate. We offer various types of aluminium ufh spreader plates for water base underfloor heating systems within our on line shop, for large or bulk orders please contact the office for a price. All our UFH Aluminium / Underfloor Heating Spreader Plates are made here in the UK, with each UFH Spreader plates are 0.5mm thick of high quality aluminium. UFH single and double channel aluminium heating spreader plates are also available. For installation of the double groove underfloor heating spreader plates please visit https://www.underfloorspreaderplates.co.uk/ "a guide of how to fit the ufh spreader plates".
• 

  Underfloor Heating Triple Spreader Plates 3 Channel Aluminium 600 x 1000mm

  Quick View From £7.20 inc VAT
  ( £6.00 ex VAT)
       British Made Underfloor Heating Triple Spreader Plates 600 mm wide x 1000 mm to fit 600 mm joists centres with 200mm Pipe Centres, each spreader plate has pre-formed Omega shape channels / grooves to retain both 15mm and 16mm underfloor heating pipes securely. The aluminium spreader plates will fit 600 mm wide floor joists [caption id="attachment_13365" align="alignnone" width="350"] Underfloor Heating Aluminium Triple Groove Spreader Plate[/caption] Each of Our Underfloor Heating Aluminium Spreader plates are made from high grade aluminium sheet, which we have had specially hardened to give extra rigidity.    
• 

  Underfloor Heating Nail Clips – 16mm UFH Pipe Fixing Clip White (100 box)

  Quick View £5.76 £6.91 Inc VAT
  (£5.76 ex VAT)  

  16mm White Masonry Nail Pipe Clips box of 100

  Ideal for use with the Suspended Floor Plated System at the end of bay keeping the pipe fixed firmly to the floor joists or battens.